4 in1 Gas Torch Solder Iron Tools Kit Welding Bu**er HT-1934-3

Features:
- and high quality.
-It is ideal for your electronics work.
-This is a excellent cordless iron.
-4 in 1 design, convenient for use and easy to carry.
-Refill gas on the top of this product and tweak this button to OFF when refilling.
-It's suitable for using in welding, electronics maintenance, vehicle repairing, etc.

Specification:
1.Brand: Taiwan hot boy
2.Name: gas iron
3.Model: HT - 1934-3
4.Material: Plastic + Aluminum.
5.Gas Capacity: 12ml.
6.Flame Temperature: 1300°.
7.Ironing Temperature: 450°.
8.Application: this product is suitable for maintenance of electronic hobbyists
9.Use fuel: but*ne (gas) and household gas are common
10.Accessories: 4 heads (solder head, head, open flame head, hot air head)
11.: silver white aluminum case
12.Function: weld, cut off, spray, hot air, four functions.

How to use
1)Put the iron head
2)Push the switch to the ON position and hear the sound of ''.
3)Use an or , near the joint ignition.
4)B**n for 3 minutes after ignition and wait for the to extinguish. The iron head will continue to heat up.
5)Adjust the size of the flame, to the 'ten' direction is large, to the 'one' direction is small.
6)this product temperature up to 1300 degrees (iron temperature 450 degrees), the use of safety should be taken, after the use of the switch closed to the OFF position.
7)When using the gas iron, pay special attention to wait until the flame is completely eliminated. When the object inside the iron turns red, operate it again. The size of the flame should not be large to prolong the service life of the iron.
8)The length of the flame is about 1.2-2.2 cm.

How to fill gas
1, Fill the gas with high quality gas and confirm that the switch is at OFF, then add it.
2, The gas tank can be into the air hole and compressed under the .
3, About 10 seconds, filling gas can be completed. Wait a few minutes, let the gas stable, and then use.
4, if the gas is filled, the tail has a "hissing" sound, press the tip of the pen slightly into the air hole, it can be eliminated.

Note:
1)The product is not filled with gas yet, please refill it before use.
2)Hot air head high, keep away from children.
3)Keep the flame away from your face, body, and clothes.
4)Avoid direct sunlight or storage above 40 degrees.
5)After use, make sure the flame size switch is off and the flame is out.
6)When filling the gas, the inlet is upward.

Package include:
1 * Gas Iron Tool Kit(without but*ne)









a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a