4.3 Inch IPS LCD Display Vector Network Analyzer S-A-A-2

This portable vector network analyzer is a new product. It uses a 4.3-inch IPS LCD display and an aluminum alloy case. It is equipped with a 5000mAh large-capacity lithium battery as standard. Support touching screen and side button operation, support Chinese and English interface. The design of this product is based on OwOcomm's S-A-A V2, and deep optimization of the software is made on the basis of the previous product. The measurement ranges is extended to 3GHz, and the dynamic ranges is larger. The measurement is more accurate and the operation is more convenient.



Features:

4.3-inch IPS LCD display, resolution 800*480, ultra-wide viewing angle, long-term use does not hurt your eyes.

All aluminum alloy case, effectively shielding electromagnetic interference to ensure measurement accuracy.

The radios frequency interface is SMA, which is convenient for connecting various tested parts.

Full touching screen design, with 3 side buttons at the same time, flexible and convenient operation.

Support Chinese and English interface.

Optimized UI design, convenient for users to perform measurement operations.

Support screen brightness adjustment.

The firmware can be upgraded through a virtual U disk, no programmer is needed, and the firmware can be upgraded through the included USB type-c data cable.

Standard fine quality calibration parts and RG405 phase-stable cable to ensure calibration accuracy.

Designed with USB output interface, which can support 5V/1A output.

Using 2A high current recharging IC, the recharging time is shorter.

Supporting host computers software, the host computers supports Chinese and English interfaces.

The screen imaging of the device can be obtained by taking a screenshot of the host computers.

Function: can measure S parameters, voltage standing waves ratio, Smith chart, phase, group delay, etc.



Specifications:

Material: aluminum alloy(case)

Main color: black

Battery: 1 * lithium battery, 5000mAh

Frequency: 50kHz-3GHz

Radio frequency output : -9dBm (error within 1GHz: ±1dB)

Frequency accuracy: