5 in 1 TDS/EC/PH/Salinity/Temperature Meter Digital Water Quality Monitor Tester

Description

-EZ-9909 is a new multi-functional water quality test instrument, which can measure pH, TDS,EC, salinity value and temperature.    The measurement range is large and wide, which can measure both freshwater salinity and sea salt
Features:
【5-in-1 Water Quality Tester】Digital pH tester has the functions of monitoring TDS, pH, salinity, EC meter and temperature measurement.    TDS measurement range: 0-1000ppm, EC measurement range: 0-10000US / cm, PH measurement range: 0.01-14.00pH, salinometer measurement range: 0.00-25.00%, temperature conversion function.
【High Accuracy】High-accuracy algorithm chip and electrode of our digital water ph tester ensure an accurate and fast response.    When the measured value is stable, just press the HOLD/TEMP key to lock the measured value and take it out for viewing, which is really simple.
【Two Salinity Meters】Digital PH meter can detect the salinity of edible salt.    At the same time, it can detect the salinity of seawater.    Food salinity measuring range: 0.00-25.00%, seawater salinity measuring range: 10.1-200.0ppt.
【Automatic power-off function & large screen display】PH tester has a backlight LCD that helps you clearly see the measurement in any case.    The automatic power-off function turns off the power after 5 minutes without any operation to save power.    Employs a fully transparent liquid crystal (LCD) to display 4-digit values and the corresponding physical quantity units.
【Automatic Temperature Compensation】Temperature can affect reading levels, Digital PH Meter for water hydroponics has an even better range of 0 °C-60 °C (32 °F-140 °F), automatic temperature compensation can ensure that you are getting the best reading, so you can test with confidence in any environment.
Note: Every time you use this, you will need to clean the electrode.

Specification：

EC Measuring range: 0 to10000uS/cm 10.01-19.99ms 20.1-400mS/CM

Resolution: 1 uS/cm;    0.1 mS/CM;

Accuracy: ±2% of reading

TDS Measuring range: 0 to 1000ppm 1000ppm to 10000ppm 10.1 to 200.0ppt

Resolution: 1ppm;;    0.1ppt

Accuracy: ±2% of reading

Salinity Measuring range: 0.00 to 25.00%

Resolution: 0.01%

Accuracy: 0.01-5.00% (±0.1%) 5.10-25.00% (±1%)

PH Measuring range: 0.01-14.00pH

Resolution: 0.01pH

Accuracy: ±0.05pH

temperature range: 0.1-60.0℃ 32.0-140℉

Calibration:

Conductivity EC: Supports 3-point calibration automatic identification (1413us 12.88ms and 111.8ms) with 3 calibration points (1413uS/cm 12.88mS/CM 111.8mS/CM)

pH: 1 point (6.86) or 2 points (6.86 4.00) (6.86 9.18) or 3 points (6.86 4.00 9.18) can automatically identify the calibration solution

Battery: LR44*3(Not include Battery)