60A Din Rail 18mm Tuya Single Phase WIFI Smart Energy Meter timer Power Consumption Monitor kWh Meter Wattmeter 110V 220V

Descrtion:

If you want to control the meter on off, you have to connect to relays. The meter output the voltage signal.

Please noted, this TUYA wifi energy meter will update the Kwh data when disconnect with wifi, other type Metering circuit breaker will not increase the Kwhwhen discounnect with wifi.

1. e Control ON/OFF by Tuya APP or Smart Life APP at anytime from anywhere

2. Total active energy kWh measure

3. APP can read kWh , R.M.S current , voltage , active power

4. Timer control function

5. Delay time cut off function

6. LCD display, Real-time display of Voltage, Current, Active Power, reactive Power, power factory ,frequence, total Energy kWh

7. Power Supply: 85-300V AC 50/60Hz

8.MAX Current: 60A Clamp CT

10. Pulse Frequency: 2000imp/kWh

11. 35mm Din Rail install

12. can use same TUYA APP, compatible with other TUYA product such WIFI socket , led ,fans and so on

13. Active energy accurate iscla 1 , IEC62053-21

Push the on last more than 10s , the WIFI led will flash quickly , then use APP to operation

bear 400V /hour not damage

Note:This meter Only supports 2.4G Wirele Network, NOT for 5G

1. General Descrtion

DDS238-1 WIFI type multi-function smart energy meter is designed to measure single phase two wire AC active energy and variable parameter. The meter have WIFI communication , it can use APP for e reading and control on/off. Its data communication rules obey the requirement of WIFI 802.11b/g/n. It is a long life meter with the advantage of high stability , high over load capability , low power lo and small volume .

The meter is manufactured complying with international standard IEC62052-11 on “Electricity metering equment (AC) General requirements test and test conditions” and IEC62053-21 on “Static meters for active energy (claes 1 and 2)”.

2.Specification and Technical

2.1Specification

Meter type

DDS238-1 WIFI

Rate frequency

50 or 60 Hz

Rated current

5(60)A Clamp CT or 10(100)A Clamp CT

Rate voltage

120V / 220V / 230V /240V

Limits voltage range

100 ～ 270V

kWh Accuracy

Cla 1

R.M.S accuracy

Cla 0.5

LCD display kWh

999999.9 kWh

Starting current

20mA(min measure )

Voltage circuit