60A Solar Charge Controller PWM Controllers 12V 24V Auto LCD LCD Display Dual USB 5V Output Solar Panel PV Regulator

1. Build-in industrial micro-controller.
2. Big LCD display,all adjustable parameter.
3. Fully 4-stage PWM charge management.
4. Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection.
5. Dual mosfet Reverse current protection ,low heat production. This is very practical type PWM solar controller ,it is small and light ,you can use 12V and 24V Lead acid ,Gel,Sealed,Flooded,AGM Batteries.It can fully meet your home Photovoltaic system(including home lighting system )requirements.

Parameter:
60A , Max Voc: 24V (12V), 48V (24V); Max Power: 780W (12V), 1560W (24V)
System Connection:
1. Connect the battery to the positive and negative of the charge regulator.
2. Connect the photovoltaic module to the positive and negative of the regulator.
3. Connect the user to the positive and negative side of the charge regulator.
The reverse order applies when unloading!
Improper sequence order can damage the controller!
Safety instructions
1. Before the first installation, please make sure the battery has enough voltage to enable the controller to recognize the battery type.
2. Battery cables should be as short as possible to minimize losses.
3. The regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL.
It does not apply to NiMH, Li-ion or other batteries.
4. The charge regulator is only suitable for regulating solar modules. Do not connect other charging sources to the charge regulator.
Model Number:Solar charge controller
Application:Charger Controller
Application:Voltage Controller
Application:Lighting Controller
Float charge:13.7V(default,adjustable)
Discharge stop:10.7V(default,adjustable)
Discharge reconnect:12.6V(default,adjustable)
Battery Voltage:12V 24V Auto Work
Max Power:780W (12V), 1560W (24V)
color:Blue+black
Material:plastic

Package Contents:
1 x Solar Charge Controller

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.