AdblueOBD2 Emulator for FORD Trucks Plug and Drive Ready Device by OBD2

AdblueOBD2Emulatorfor FORD TrucksPlugandDriveReadyDevicebyOBD2

Description:

AdBlueOBD2 is a PlugDrive Ready device to mulate working adBlue systems
and NOx sensors on trucks, which equippedwith EURO 4/5/6 catalytic converter
systems, even with damaged adBlue SCR system. dBlueOBD2 is easy to install.

Features:

1. Easy to install. Just Plug it into OBD2 connector of truck, then it begame to work.
2. Override Adblue system instantly, stop the usage of Adblue .
3. Without any loss of the engine or any warnings on the dashboard.
4. Won't damage engine and not cause any negative effects to truck factory setting.
5. Won't change any of the settings permanently.
6. To turn back to the truck's settings, just unplug it from OBD2 connector.

Specification:

Model: AdblueOBD2
System: Adblue
Voltage Input: 12V
Working Temperature: -60-60℃
Size: 16x9x3cm
Applicable: FORD Trucks

Installation Instruction:

1. Pull the Key out from the ignition.
2. Remove the following Fuses (DAF) 6 - 15A E357 - 20A
3. Plug adBlueOBD2 into OBD2 connector
4. Turn on the ignition and check the level of Adblue if it 50% or 70%.
5. If any fault light appears on dashboard, delete via service scanner.

Package include:

1 X AdblueOBD2 Emulator Box Interface
1 X User Manuel English







a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a