Adjustable & Non-adjustable AC Output Power 600W DC 24V 36V 48V 72V MPPT Solar Grid Tie Inverter Battery Discharge Power

Adjustable & Non-adjustable AC Output Power 600W  DC 24V 36V 48V 72V MPPT Solar Grid Tie Inverter Battery Discharge Power

Whole consult the service of store .

There are 3 kinds of model:

For Non-adjustable AC output power,there are 2models,one is PV terminals for both Solar panles input & battery input, the other is DC terminals for both Solar panles input & battery input.. For adjustable AC output power,there are 1 model, it is DC terminals for both Solar panles input & battery input..

Specifications:

PV grid-connected inverter operating mode

The grid-tied inverter has an automated working order, without needing to monitor. On detection the power output from solar panels, device will decide if the power was large enough to begin the conversion proce. Coversion proce includes 5 modes, Startup, Grid-tied begin, Standby, Stop, Fault-find.

Startup - When the start on is on, solar panel and grid lines both connected in normal condition, inverter enters working condition.

Grid-tied begin - Grid-tied begin mode is when inverter starts to convert the Direct Current fed through from PV solar panel to a stable Alternate Current and flow to the utility grid. To enable the maximum output of energy, the device uses MPPT control technology to track sun rays, this technology promises the maximum efficiency under diferent daylight and temperature conditions.

Standby - Standby mode is when device detects insufficient power feeding through from the solar panel, or device detects abnormal status such as voltages, frequencies, and temperatures not in the permitted range, the device enters standby mode.

Stop - Insufficient sunlight hence insufficient PV power feeding through to the device and device enters into the standby mode, when this condition continues and DC voltages falls below 12V for over 1 minute, the device will enter Stop mode.

When error ocurs, fault find indicator starts flashing, device will enter Stop mode. Please see 3.4 error status on LED indicator.

(Battery) discharge and grid mode(With ADJ function models)

1.The DC input of the system can be directly connected with the battery, Turn the knob of the inverter to the right into the battery mode, then the tracking function will be turned off, the output power will be adjusted from left to right, At this point the output power can be adjusted from 80W-450W or so arbitrary output to ensure that the inverter can work for a long time in the grid status.

2. When the inverter connected to the battery discharge, if the battery voltage is too low, the inverter will automatically stop and cut off grid output to protect the battery over discharge to extend battery life.

3.Different specifications of the input voltage of the inverter will be used with different voltage battery, the battery voltage protection point please refer to the following

please match the battery voltage with the inverter voltage

Battery voltage

Inverter Input

Battery Low voltage protection

Battery high voltage protection

12V battery

NO for 600W

NO

NO

24V battery

26V~45V

21V

29V

36V battery

40V~62V

33V

43.5V

48V battery

55V~90V

44V

58V

60V battery

48V~86V

55V

72.5V

72V battery

85V~130V

66V

87V

96V battery

120V-180V

88V

120V

PAYMENT/SHPING

duties, taxes and charges are not included in the item price or shping charges. These charges are Buyer’s responsibility. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. For custom clearance procedure. If you need help, please let us know. e area addition fee （ & ） A e Area is defined as a post code or in the absence of post code, a suburb /town name that is difficult to serve. A delivery to one of the following post codes and towns would attract a e Area surcharge. For Expre shments, a pickup from one of the same post codes and towns would attract a e Area surcharge. Please refer to your service guide for the surcharge amount in local currency

WARRANTY/QUALITY:

CE certified. 100% QC before shment. Standard 1 year product warranty Warranty will cover only it that are deemed to fail under normal usage. Accidental damage due to environmental causes or incorrect usage and installation will not be covered in warranty (but still serviceable) Contact us directly for warranty iues Buyer is responsible for warranty return shping.

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.