APEXEL Fill Light Phone Clip-APL-FL.23

APEXEL Fill Light Phone Clip

1. Three-in-one mobile phone clip, lens clip, and fill light, all in one innovative design. Breaking through the traditional single lens clip on the market, it effectively solves the problem of shooting in low-light environments (lens not included)
2. Comes with M17/M37 thread, which can be used with many sizes of adapter rings, suitable for 17mm and 37mm threaded mobile phone photography lenses (macro/fisheye/wide-angle/CPL filter/ND filter/starlight lens) wait)
3. The cold shoe port can be connected to a fill light or microphone, and the 1/4-inch threaded port can be connected to a tripod.
4. The fill light board is composed of 40 high-brightness LED beads (20 white light + 20 yellow light)
5. Equipped with 2/3/4mm EVA gaskets of different thicknesses to fill the gap on the back of the phone so that the clip is flush with the camera
6. Elastic stretch, quick disassembly and assembly, stretch adjustment to adapt to mobile phones of different widths
7. Three levels of color temperature 2700-6500K, three levels of brightness adjustment
8. There are silicone strips on both sides to prevent slipping and not pinching the phone.
9. Built-in 350 mAh lithium battery, Type-C charging interface
Parameter:
1. Weight: 95g
2. Product size: 90X60X30mm
3. Width of mobile phone clamped: 66-95MM
4. Power: 2W
5. Color rendering index: greater than or equal to 95+
6. Illumination: 250 LUX/0.5m
7. Bracket interface: 1/4 inch thread
8. Bracket interface: cold shoe opening
9. Lens interface: M17/M37 threaded interface
10. Product material: plastic + aluminum alloy + silicone + stainless steel
Packing list:
LED light x 1
USB Type-c charging cable x 1
Waterproof bag x 1
Instructions x 1
Packing box x 1
​