Best Seller Heat With Carry BOX Protective Cover hot air LCD Display Thermal blower Temperature/wind speed adjustable

NO LCD Display Version

Application: remove paint, peel old vallpaper, remove plastics floor tile, bend pvc pe,melt litter in pe, remove greasy litter, for shrink w-rap.

Features:

Steple temperature adjustable knob, 60-600℃ contant temperature adjustment can weld a variety of plastics types.

Digital display design can b-etter adjust the temperature.

Fine quality heating elements ensure reliable and s-afe operation.

The temperature and air v-olume can be easily adjusted.

Power output is stable, quick speed, suitable for long time operation, to prevents overheating burned.

Can be applied in , welding PVC, shaping, drying, shrink-fitting, strping paint, etc.

With high temperature resistant heat insulation s-hield and dustproof i-nlet, s-afe to use.

With a h-anging loop for convenient storage.

Specifications:

Main material: metal+plastic

Plug: EU-plug, 220V, 50Hz/US PLUG 110V

Power: 2000W

Temperature: 60-600℃

Side LCD Display Version

Specifications: Main material: metal+plastics Plug: EU-plug, 220V, 50Hz/US PLUG 110V Power: 2000W Temperature: 60-600℃ Air v-olume: 350L/min, 500L/min (adjustable) Noise: 30dB

Back LCD Display Version

NOTE

With the function of delayed shutdown, the hot air continues to blow cold air to cool the heating core, protect the heating core and prolong the service life Insulated heating core ed from Germany Mabuchi-Motor ed from Japan

About Heat

Product features: 1. The double heating wire rises rapidly 2. Mica heat insulation of barrel is safe and reliable 3. ABS nylon engineering handle is comfortable to hold 4. Two gear wind speed regulation is suitable for many scenarios matters needing attention: ① When using the hot-air , try to use it in a dry place. ② When the hot-air is used or just after use, do not touch the nozzle to avoid scalding. ③ The handle of the hot air must be kept dry, clean and away from oil or gas. ④ After the hot-air is used, the air outlet is upward and can be stored only after the air is cooled. ⑤ Do not block or cover the air inlet and outlet of the hot-air . Safety warning: 1. Don't use it as a hair dryer for blowing my hair. 2. Do not point the hot air directly at people or animals 3. Do not use near inflammables and flammable gases Product s: Working voltage: 220-240V / 50Hz Power consumption: 2000W Temperature range: 60-650 ℃ Temperature regulation mode: steple temperature regulation Air volume: 100 / 300 L / min Switch: second gear wind speed adjustable Shell material: PP + 15% gla fiber Rear cover shell material: ABS Motor: Japan 365 Mabuchi-Motor Heating cylinder: Luo iron plated material Heating core: Gold mica plate + insulated heating core + jump switch + ceramic framework Power cord: rubber power cord + European standard two plug 3C certification standard 1.8m (external 1.5m), including grounding 2-1.0m3 into the machine part, with an outer diameter of 6.8mm

With the function of delayed shutdown, the hot air continues to blow cold air to cool the heating core, protect the heating core and prolong the service life Insulated heating core ed from Germany Mabuchi-Motor ed from Japan Product features: 1. The double heating wire rises rapidly 2. Mica heat insulation of barrel is safe and reliable 3. ABS nylon engineering handle is comfortable to hold 4. Two gear wind speed regulation is suitable for many scenarios matters needing attention: ① When using the hot-air , try to use it in a dry place. ② When the hot-air is used or just after use, do not touch the nozzle to avoid scalding. ③ The handle of the hot air must be kept dry, clean and away from oil or gas. ④ After the hot-air is used, the air outlet is upward and can be stored only after the air is cooled. ⑤ Do not block or cover the air inlet and outlet of the hot-air . Safety warning: 1. Don't use it as a hair dryer for blowing my hair. 2. Do not point the hot air directly at people or animals 3. Do not use near inflammables and flammable gases Product s: Working voltage: 220-240V / 50Hz Power consumption: 2000W Temperature range: 60-650 ℃ Temperature regulation mode: Key temperature regulation Air volume: 100 / 300 L / min Switch: second gear wind speed adjustable Shell material: PP + 15% gla fiber Rear cover shell material: ABS Motor: Japan 365 Mabuchi-Motor Heating cylinder: Luo iron plated material Heating core: Gold mica plate + insulated heating core + jump switch + ceramic framework Power cord: rubber power cord + European standard two plug 3C certification standard 1.8m (external 1.5m), including grounding 2-1.0m3 into the machine part, with an outer diameter of 6.8mm

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.