Black&Silver PCIe 4.0 x16 Riser Cable RTX3090 RX6800xt Graphics Cards ITX A4 PC Case PCI-E4.0 16x Double Reverse Extension Cable

ADT-Link PCI expre 4.0 x16 Extension Cable for ITX A4 Chais

Brand name: ADT-LINK

Product name:PCIe4.0 x16 to x16 extension cable

Product model:R33UF-TU-BK-4.0( Black color ) R33UF-TU-SI-4.0 ( Silver color)

Transfer speed: PCIe 4.0 x16 full speed, 256G/bps (Max)

Wire length:140 ~ 300 mm, the length can be customized

Application: PCIe x16 graphics video card to PCIe x16 slot extension cable for ITX mainboard housing

Suitable graphics card :RTX3090 RX6800xt, Supports PCIe4.0 graphics cards

Compatible chais: A4 ITX custom chais Use limitation: PCIE4.0 has high requirements on equipment, and the signal will decay as long as the extension cord is connected. This product does not guarantee the full speed of PCIE4.0. If the equipment is aging, the signal is poor or the environment is bad, please use it at a lower speed GEN 3.0 .

Restrictions: Only for ITX motherboard and its compatible mini chais installation.Older graphics cards or motherboards older than four years are not supported.

Support : RTX3060 RTX3060Ti RTX3070 RTX3080 RTX3090 GTX1080, GTX1080Ti, RTX2060, RTX2070, RTX2080, RTX2080Ti, RX570, RX580, RX590, RX5700 XT,R6800 XT RX VEGA 56, RX VEGA 64 etc, support for all graphics cards produced after 2015.

Cable length Description:

The length of the wire refers to the part of the visible wire. It does not include the and the connector's Length. For the wire length, please refer to the red arrow in the figure below.

Q&A:

Is there any EMI shielding for Cable?

The extender utilizes the latest materials for EMI shielding with five sole flat cables design. This technique allows each cable to be fully covered by electromagnetic interference shielding with conducting polymer to guard against incoming or outgoing emiions of electromagnetic frequencies, minimize disturbance and degradation on performance, and reduce the weight of the extender.

。

Product advantages: One. Wire advantage, the fourth-generation anti-interference low-resistance wire developed and designed by ADT is scratch-resistant and wear-resistant, and high-frequency supports PCIe 4.0 stable transmiion Two. Line length advantage, from 15cm to 60cm can be customized Three. Differential signal has no via hole design, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF micro short circuit phenomenon, and the product is durable Four. The product is made of high-quality materials and the is made of precision. The uses high TG plates. The thickne of the copper material is thickened to 1oz. The gold fingers have sufficient gold plating content and the gold plating feet have good electrical conductivity, which can reduce the blue screen of crash caused by increased oxidation and rust resistance. Five. The wire used in the product is very durable. Use gaskets with a thickne of 3mm to protect the metal welding points, and lock the screws and hexagonal nuts to fasten the product. The product is strong and reliable, resistant to pulling, anti-interference, and will not break the wire. The nail drop problem. The wire can be bent or folded without affecting the use.

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.