DC 4-30V 10A 50A 100AVoltmeter Ammeter LED Digital Car Motocycle Voltage Current Power Meter Volt

LED Digital Voltmeter Ammeter Car Motocycle Voltage Current Power Meter Volt Detector Tester Monitor Panel DC 4-30V 10A 50A 100A

Feature:

1: Multle selection of voltage specifications 10A 50A 100A 2: Three colors are available: red blue, red green, blue green 3: cost-effective 4: Simple to use 5: Small appearance

Notice!

50A /100A must be used with a shunt M430 is a voltage, current and power measuring instrument. It can only measure and display the voltage, current and power of the circuit under test. The displayed value can be fine-tuned through an adjustable resistance. It does not have the functions of buck-boost or current limiting. The actual voltage and current of the loop has no effect. Do not use high voltage above 30V when using, otherwise it will cause overvoltage damage to the product. The 10A range product comes with a shunt resistor, and there will be a short circuit at the test end of the direct current measurement. As long as the meter is connected in series with the load according to the wiring diagram, it can be used normally. 50A/100A range products need an external shunt to be used normally. After connecting the shunt, there will be a short circuit at the test terminal to directly measure the current. As long as the meter is connected in series with the load according to the wiring diagram, it can be used normally. According to different current ranges, it is p>

Operating Voltage

The working voltage of the instrument is DC 4~30V, and 5~12V is recommended. The thin red wire is the positive pole of the working power supply, and the thin black wire is the negative pole of the working power supply, which belongs to the common ground with the thick black wire; When using, the limit voltage connected to the thin red and black wires cannot exceed 30V, and 12V power supply is recommended

10A Measuring range

10A: Voltage measurement range is 0~100V, display mode below 10V is 0.00V, voltage starts at 0.2V, error range is ±1V, current measurement range is 0~10A, current starts at 0.03A, error is ±0.1A DC0.20V~9.99~10.0~100V (±1M) DC0.03A~9.99A (±0.1) 50A: The voltage measurement range is 0~100V, the display mode below 10V is 0.00V, the voltage starts at 0.2V, the error range is ±1V, the current measurement range is 0~50A, the current starts at 0.03A, and the error is ±0.5A DC0.20V~9.99~10.0~10OV (±1V) DC0.03A~9.99~50.0A (±0.5A) 100A: Voltage measurement range is 0~100V, display mode below 10V is 0.00V, voltage starts at 0.20V, error range is ±1V, current measurement range is 0~100A, current starts at 0.03A, error is ±1A DC0.20V~9.99~10.0~100V(±1V) DC0.03A~9.99~100A (±1A)

Package list：

1*Voltage current power meter 2* power supply load line

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.