DC 612V NE555 Pulse Generator Module DIY Kit

DC 6-12V NE555 Pulse Generator Module DIY Kit Sine/Triangle/Square Wave Generator multi-channel Waveform Signaenerator Light green: Supply voltage: 6-12V DC voltage, 9V is recommended Size:4.39*5.09*0.15cm Product manual: NE555 multi-channel waveform generator can generate square wave,tooth wave, triangle wave, sine wave. A waveform output is selected by a jumper, and the circuit is simple and convenient to operate. In the circuit, D1 is an anti-power supply diode and C1 is a filter capacitor. IC1, R1, R2, and C2 form a square wave generator, and the signal is output from pin 3 of IC1, and C3 is an anti-interference capacitor. The square wave output from the third pin of IC1 is divided by R3, R4, and C5. The short-circuit block is shorted to J1 to output a square wave at the output. The other way is divided by C4 and C3, and thetooth waveform is formed by J2 through the integrating circuit R5 and C7, and then the stage integrating circuit R6 and C8 form a triangular wave to output from J3. Ar the final R7, ar the amplification circuit composed of C9, R8, Q2, and R9 is amplified, the collector of Q2 becomes a sine wave. R10, R11, and form an emitter follower amplifier circuit, and the final signal is divided by W1 and coupled to W1, and output from the output terminal. Circuit principle: In the circuit, D1 is a diode against reverse connection of the power supply, and C1 is a filter capacitor. 1C1, R1, R2, C2 form a square wave generator, and the signal is output from pin 3 of 1C1 C3 is an anti- capacitor. The square wave output from the 3rd pin of 1C1 is divided by R3, R4 and coupled by C5, and can be output at the output end by shorting J1 with a short-circuit block. square wave. The other channel is coupled with C3 and divided by C4, and forms atooth waveform through the integration circuit R5 and C7, which is output by J2, and then paes through the stage of integration. Road R6, C8 form a triangle wave and output from J3. Ar ZUI, ar paing through R7, it is amplified by the amplifier circuit composed of C9, R8, Q2, and R9, and then at the collector of Q2 into a sine wave. R10, R11 and form an emitter follower amplifying circuit, and finally the signal is divided by C10 coupled with W1 and output from the output end. DIY KIT list:

Deep green:

About shipping
Shipping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days ar buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.