DC0-100V 10A LED Digital Voltmeter Ammeter Car Motocycle Voltage Current Meter Volt Detector

Old version

The factory has adjusted the internal interval of the . If you have a back board, please don’t buy it. Working voltage:4.5-30V DC Note: The maximum input voltage can not exceed 30V, otherwise there is the danger of burning Working current:≤20mA Display: 0.28" Two color blue and red Measuring range: DC 0-100V 0-10A Minimum resolution (V): 0.1V Refresh rate: ≥100mS / times Measure accuracy: 1% (± 1 digit) Minimum resolution (A): 0.01A Operating temperature: -15 to 70° c Working preure: 80 to 106 kPa size :48×29×21 mm The connection below 10A does not need to connect the shunt: it can be directly connected, respectively, AB short circuit, CD short circuit

New version：

Working voltage: DC4~30V

Voltage range: DC0V~100V (0.02V jump)

Voltage error: ± 1V

Current range: 10A (0.03A jump)

Current error: ± 0.1A

Product size: 47.63x28.66x23.74mm

Installation opening: 45.11x26.00mm

Shopping Note: r cables need to be purchased separatelyReal-time power is displayed alternately with current, no setting required.

To measure temperature, connect NTC r,

Connect the r to the NTC interface to measure,

The temperature and voltage are displayed alternately; the temperature measurement function is the basic function

However, the NTC r is an optional acceory.

Voltage measurement range: DC0.20V~9.99~10.0~100V (±1V)

0~100V, the display mode below 10V is 0.00V, the voltage starts from 0.2V, the error range is ±1V,

Current measurement range: 0~10A, the current starts at 0.03A, and the error is ±0.1A DC0.03A~9.99A (±0.1A)

Basic operation: Check the metter Wiring as shown below, the meter displays the voltage, the current is 000, the product is qualified

Common power supply Test 4~30V loop wiring The thick red wire is connected to the negative pole of the load; the thin black wire is not connected to prevent short circuit.

Independent power supply to measure 0~100V loop The thin red and thin black wires cannot exceed 30V。

Measure the wiring method of solar charging

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.