Digital external micrometer, high-precision thickness gauge, 0-25 mm micrometer

1. ON \ OFF ... SET: ONOFF and set button. Press the button briefly, switch the device on and off, press this button for a long time and set the zero to "0.25,50,75". "Hold down the button to alternately display several zero values Key when one of the zero values is displayed The zero value is the currently displayed value.

2. ZERO: Zero button. Press the button. The data will be used as default starting value (0.25,50,75).

3. ABS ... in / mm: Relative and absolute scale conversion key, metric and inch conversion key. Press this button briefly to perform the absolute measurement and the relative dimension conversion "In" and small font "5", it will be displayed in inches.

• Operating temperature: 0-40 ° C
• Humidity in operation: ≤ 80%

• 1 x Digital Electronic Micrometer (with a CR2032 battery)
• 1 x user manual
• 1 x storage box

• 1、Please note the sharp edge to avoid a wound.
• 2、Please wipe the probe clean before use to make sure there is no dirt, otherwise it will affect the accuracy

• 1. Large LCD display, clear screen,
• 2. Carbide mental probe, durable
• 3. The micrometer with ratchet thimble
• 4. It can measure both relative and relative measurements.
• 5. Automatic turn off in 5 minutes
• 6. Battery: Lithium battery CR2032 (obtained) lasts more than 2000 hours