DIY Driveway Paving Pavement Mold Concrete Stepping Pathmate Mould Paver

Note:
The of the item slightly due to photography and different PC , and the size might be slightly errored due to manual measurement. Your kindly understanding would be appreciated.
It is recomended to use fiber-reinforced concrete.
Please place the product on a smooth and flat surface.

Use Instructions:
1.Remove 1 inch of top soil, and level the mold before filling with concrete. (The removed soil can be used to fill open spaces on sides after walk has set up)
2.Mix concrete and add sufficient water to it. Mix thoroughly until plastic-like consistency is achieved.
3.Shovel or trowel to fill each mold cavity to the surface of the mold. Pat and smooth the surface with a trowl.
4.Remove the mold promptly, and smooth the concrete edges with a trowel.
5.Place the mold adjacent to the completed section and continue this process untill your project is completed.

Specifications:
Name: Pathmate Mold
Model：670465
: Black
Material: Plastic
Shape: Square
Size: 40cm x 40cm x 4cm (15.75''x15.75''x1.6'')
Used For: Create a custom walkway, path, patio or courtyard










a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a