DIY Video Capture Card GB Interceptor Built in RP2040 Bo

The GB Interceptor is an adapter that goes between an unmodified and the and offers a video stream of via USB. The core processing unit consists of the for rp2040.
This product is mainly based on the project GB Interceptor(https://github.com/Staacks/gbinterceptor)
Plug and play without modifying the Gameboy
Capture or stream gameplay footage via USB. Compatible with a of Gameboy consoles
Usage Note: you do not need to open the video stream first. The only ant step is that the GBinterceptor is powered via USB before Boy is turned on.Plug the gbInterceptor into the gameboy console, then plug in card. Connect the GbInterceptor to your computer ,then turn on the Gameboy, Load video source on the video device

Buttons
[Mode] button ( to the )
switch between grayscale/green colors and toggle frame blending. Each press switches colors and frame blending is toggled each time it returns to grayscale.
[Flash] button (near the center, usually inside the case)
only used to flash a new firmware version. Simply hold it while plugging in the USB cable. should appear as a storage device (like a USB stick) and you can simply drag the new firmware file (a uf2 file) into it.
Compatible devices:
for ( )
for Advance (-001)
for Advance SP
for Color
for Player for
for Pocket
for Super

The red LED indicates that is powered.
The blue LED stays on as long as is in sync with . (It may shortly turn off for a fraction of a second when Boy turns the display off, . when loading a level.)
Colour:Grey
Material:plastic


Package Contents:
1 x Video Capture Card

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.