DMX512 DFI DJ Wireless Receiver Transmitter 2.4G For LED Stage Light Par Moving Head Beam LED Light 400m Control

DMX512 DFI DJ Wirele Receiver Transmitter 2.4G For LED Stage Light Par Moving Head Beam LED Light 400m Control

NOTE:

1T AND 1R=1pc Transmitter+1pc Receiver

1T AND 2R=1pc Transmitter+2pcs Receiver

1T AND 3R=1pc Transmitter+3 pcs Receiver

1T AND 4R=1pc Transmitter+4 pcs Receiver

1T AND 5R=1pc Transmitter+5 pcs Receiver

This wirele receiver/transmitter can help you to get rid of countle wire. And it is quite convenient to use since male plug can be match with many female plug.

Features:

DMX512 wirele receiver/transmitter transmits standard DMX512 protocol data ( generated by console ) by wirele way.

No time delay when signal data is transmitting, signal data is real time and reliably.

This product adopts a 2.4G ISM frequency section.

High effective GFSK modulate,communication design; 126 channels jumping frequency automatically, high anti-jamming ability.

126 channels jumping frequency automatically, high anti-jamming ability, to ensure works reliability.

7 groups ID code settable,User can use 7 groups individual wirele net without any interfere each other in the same place. ( Tricolor LED displaying Indicators )

Specification:

2.4G wirele DMX512 R/T

Input voltage: 5VDC 500mA MIN

Receive Sensitivity: -94dBm

Max transmitting power rate: 20dBm

DMX connector: 3pin male, 3pin female

Communication distance: 400M ( visible distance )

Work frequency section: 2.4G ISM, 126 channels.frequency section

Plug standard: US, EU plug ( optional )

Material: zinc alloy + plastic

Item size: 21 * 2.5 * 2.5cm/8.26 * 0.98 * 0.98in ( L * W * H ) ( 1pc )

Cable length: 107cm/3.51ft

Item weight: 65g/2.29oz ( 1pc )

Package size: 14.5 * 10.5 * 4.5cm/5.7 * 4.13 * 1.77in ( L * W * H )

Operating manual:

ID code and LED color corresponding relationsh:

1: RED

2: GREEN

3: RED+GREEN

4: BLUE

5: RED+BLUE

6: GREEN+BLUE

7: RED+GREEN+BLUE

1). Pre momentary switch above the side led indicator to indicate ID setting.

2). Pre again to set IC, to the color ID desired, adding 1 each time you pre the switch will advance the color IDcode.

3). Working condition:

LED constant lit up: No DMX or wirele signal.

Red LED flash: Transmitting.

Green LED flash: Receiving

4) RF frequency 2.400 - 2.525G, total 126 channels, it’s searching automatically.

5). ID Code “1-7” groups ID code, pre ‘KEY’ for setting, it only can work under same ID code of transmitter and receiver. ( Same LED Color )

Establishing Communication

1. Power on DMX512 wirele received board first and then following to power up the transmitted board.

2. Pre “Key” on to set same ID value of transmitted board and received board. Please use different ID value if you need use more than 1 group wirele universals at same time in same place.

3. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flashes until received same ID value, the more DMX data, the faster the LED flashes.

4. Communication was established correctly.

Package include:

DMX 512 Wirele Lighting Controller Transmitte+adapter (according to your choice)

DMX 512 Wirele Lighting Controller Receiver+adapter (according to your choice)

*Please contact us first when you have any problem,we will give you the best service and soe the problem ASAP.Thank you so much.

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.