Dropsh MH1210W STC1000 12V 24V AC 110-220V 10A LED Digital Thermoregulator Temperature Controller NTC Probe Incubator

Dropsh MH1210W 12V 24V AC 110-220V 10A LED Digital Thermometer Thermoregulator Temperature Controller NTC Probe Incubator

78442

Top Selling Goods

MH1210W Specifications: 1. Voltage: AC 90-250V / DC 9-72V 2. -40C ~120C: Measurement error +- 0. 5 C 3. -40C~120C: Temperature control accuracy: 1C display accuracy 0. 1C 4. NTC25C=10K B3435 Soil 1% (1 meter long, regardle of positive or negative) 5. Power supply voltage: DC version is DC12~72V, AC version is AC100/220V 6. Working environment: Temperature: -20 C ~ 70 C, humidity: 90% RH no condensation 7. Product size: 75*85*35 (width, depth, height) mm Instructions: Pre the S key for 3 seconds to enter the program menu code mode, which displays the code HC. Pre the " or " key to cycle through the HC-CP-LA-PU-CA parameters. To enter a code, pre the S key, pre the " or " key to change the desired value and pre SET to save and exit. . Control temperature setting: Short pre S key (not more than 2 seconds) to display the factory default control temperature. Pre " or " key to change the value well to save automatically. (Pre and hold the " or " key for 2 seconds to quickly adjust the value.) Heating control: When the temperature control method (code HC) is set to H, for example, the set control temperature value is 28 C, and the temperature difference is 2 C. When the ambient temperature value ≥ the set temperature value (28 C), the relay opens and closes the output load; when the ambient temperature value ≤ the set temperature value (28 C) - the return temperature (2 C and the "delay" is set After the start time, the relay pulls up to start the output load; (if the delay function is not needed, the delay start (code PU) can be set to 0). Cooling mode: When the temperature control method (code HC) is set to C, for example, the set control temperature value is 28 C, and the temperature difference is 2 C. When the ambient temperature value = set temperature value (28 C) + hysteresis temperature (2 C) and the "delay start" is set After the time, the relay is sucked and the output load is started: (It is recommended that the delay start time is the default time to protect the compreor. If no delay is required, the code (PU) is set to 0)

STC1000

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.