Dry Cell Dial Display Flowmeter Stainless Steel LCD Electronic Flow Meter Thread Flow r Water For Farm Garden Irrigation

About this item

Dry Cell Dial Display Flowmeter Stainle Steel LCD Electronic Flow Meter Thread Flow r Water For Farm/Garden IrrigationMain features of dry cell dial display flowmeter:1. Battery powered2. LCD dial display3. Ease of 4. Widely d in swing pools, s, large water s, farm irrigation and other industrial equment.Turbine Electronic Flow Meter: DN15(1/2"), (3/4"), DN25(1"), DN50(2").Flow range: DN15(5-150 L/min), (5-150 L/min), DN25(20-280 L/min ), DN50(60-1100 L/min) Error±10%.Material: Stainle SteelMedium: water or liquid of similar concention to waterMeasurement accuracy: ±10%Repeatability: ±0.5%Maximum working preure: 20 BarRange ofulative number of claes: 0-999999Single count range: 0-9999.9ulative count range: 0-999999Units of Measurement: Liters/L, Gallons/GAL, Pints/PTS, Quarts/QTSSingle measurement clear: CLEARPower supply mode: 2 AAA batteryConnection method: female thread/male thread

Notice:1. The more you order, the more offers, please contact us3. Package list: Flowmeter*1 (battery not included)

INSTRUCTION

1. Clear the data of single measurement.When in counting or standby mode, pre the "CLEAR" key, the LCD will displayin full screen (as shown below), releasethe "CLEAR" on to return to the standbyinterface, and the single count number has been cleared.

2. Clear the data of total measurementWhen in counting or standby mode, short pre the "SET”key to switch to total interface, pre andhold the "CLEAR" key for more than 5s, the LCD wil display in full screen, ar 5s, the LCD screenwill automatically return to the standby interface, and the total aculation has been cleared.

3. Switch the interface between flow rate、total flowWhen in counting or standby mode, pre the "SET”key to switch the interfacebetween flow rate, total flow (shown as below).

4. number settingWhen in counting or standby mode, pre and hold the "SET" key for more than 5 secondsto the setting interface (shown as below), pre the "CLEAR" key to modify the fing divalue, pre the"SET" key to switch the fing di, when finish setting, pre the "SET"key to save and exit the setting molde, or if you don't have any futher operation, the system willautomatically save and exit the setting mode ar 30 seconds.

5. Measurement unit settingWhen in counting or standby mode, pre and hold the"SET"+ "CLEAR" keys for more than 5 seconds to the unit setting interface, pre the "CLEAR" key to switch the unit between L, GAL, QTS, PTS (shown as below), when finish setting, pre the "SET" key to save and exit, or if you don't have any futher operation, the system will automatically save andexit the setting mode ar 30 seconds.

6. Quickly view the numbers of s and total flowWhen in counting or standby mode, pre and hold the "SET" + "CLEAR" keys for lethan 5s, it shows the s and total flow(shown as below).