Dual Display Digital LED DC DC 5V to 1.2V-24V USB Step Up Down Buck Boost Converter Power Supply Module Voltmeter Ammeter

Dual Display Digital LED DC DC 5V to 1.2V-24V USB Step Up Down Buck Boost Converter Power Supply Module Voltmeter Ammeter

Descrtion:

XY-SUPA is a DC adjustable step-up / step-down power module with 3 Bit LED digital tube display. The output voltage is displayed in real time. Adjust the output voltage with two ons. The output voltage meets the requirements. Can be used as a step-down power module for general use. Simple, efficient and practical.

Features:

1>. Low power module

2>. Wide voltage output

3>. Supports boost and buck

4>. Long handle potentiometer adjustment

5>. Support enable / disable output

6>. Parameter memory function

7>. Support calibration

Parameters:

1>. Product Name: XY-SUP DC 3W USB Up / Down Power Module

2>. Product Numbers: XY-SUP

3>. Input voltage: DC 3.5V-12V

4>. Output voltage: DC 1.0V-24.0V

5>. Output power: 3W (maximum)

When the output DC is 1.0V ~ 2V, the maximum output power is within 2W;

The maximum output power is within 3W when outputting DC 2V ~ 24V;

6>. Conversion efficiency: 94%

7>. Working current: 30mA

8>. Voltage accuracy: +/- 0.5%

9>. Current accuracy: +/- 1%

10>. Operating temperature range: -20 ° ~ 85 °

11>. Operating humidity range: 0% -95% RH

12>. Size: 70 * 26 * 14mm

Key Functions:

1>. Short pre any key to turn on / off the voltage output. On means that the output is enabled and the output voltage is displayed, "On" is displayed, then the output current is displayed. Off means disabled and "Off" is displayed on the second line.

2>. Pre and hold any on for more than 3 seconds to adjust the output voltage. The screen flickers. Short pre the “UP” on to increase the output voltage, and short pre the “DOWN” on to decrease the output voltage. Each time the on is preed, the voltage changes by 0.1V. The module supports long pre to quickly adjust the output voltage. The setting parameters are automatically saved after 3 seconds.

Calibration Voltage:

1> .Calibrate Voltage: Pre any on before the power is turned on, then turn on the power and release the on after 5 seconds. The calibration mode will automatically enter after 5 seconds. The voltage display will flash '8.8.8'. Short pre the "UP" on 'DOWN' to adjust and calibrate the voltage. If you pre any on for 2 seconds, enter the current calibration mode. If you pre and hold the on for 5 seconds, the parameters are automatically saved and return to the normal display interface.

Use Steps:

1> .USB socket input voltage;

2>. Adjust the output voltage by the on to meet the required voltage;

3>. Remove the input voltage;

4>. Connect the load at the output;

5>. Turn the power back on and enjoy using it.

Note:

1>. Do not short the output.

2>. The maximum output power is 3W and cannot be exceeded.

3>. Support over power protection. The output voltage stops automatically. When the output power is greater than 3W, the screen displays "OPP".

4>. It supports undervoltage protection. If the output voltage is lower than 0.8V, it will automatically stop the output voltage and the screen will display “P”.

5>. It supports overcurrent protection. If the output current is greater than 2A, it will automatically stop the output voltage and the screen will display "OCP".

6>. The module does not support reverse connection protection. Please do not short circuit and reverse connection.

7>. The output current cannot be adjusted.

8>. Please read the instruction manual and instructions before use.

Application:

1>. Ordinary power supply;

2> .LED drive power;

3>. Instrument voltage display;

4>. Tester;

5>. Circuit test;

6>. Power conversion.

Package Included:

1x XY-SUPA DC 3W USB Step Up Down Power Supply Module

Ts:

Friend, if you want to know more Step Down 、Step Up Board Model or the Instructions, just feel free to contact with us, we will help you to soe it, thanks.

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.