DY-AP3015 Stereo Digital Power Amplifier Board 12V/24V 30W X2 High Power Dual Channel Class D DIY Power Amplifier Module

Precautions for use:
The recommended power supply voltage is DC 8~24V. If it exceeds 26V, the chip will be burned. If it is lower than 8V, there will be noise. When connected to a 4 ohm speaker, the power supply should not exceed 12V, and when connected to an 8 ohm speaker, the power supply should not exceed 24V.
The power supply current is recommended to be more than 2A. The working power of the module exceeds 20W*2, and a heat sink needs to be added.
Ensure that the input audio signal is 0.5V~1.5V. The speaker cable should not be too long, and ensure that it is suitable within 1 meter.
Pay attention to electrostatic protection. Before touching the power amplifier board, you need to release the static electricity on your hands to avoid the breakdown of the power amplifier chip by static electricity. The digital power amplifier is more sensitive to static electricity.

It is recommended to use a speaker with a rated power of 30W and above to avoid the speaker from being overheated and burned.
Adapter speaker (30W~150W): 4 ohm (8-12V power supply); 8 ohm (8-24V power supply)
Module protection mechanism: power reverse connection protection; short circuit protection; self-recovery overheating protection
Product Name: 30W Stereo Digital Power Amplifier Module
Product Model: DY-AP3015
Working voltage: DC: 8~24V
Speaker impedance: 4 ohm~8 ohm
Speaker power: 30~150W
Working mode: Class D (PWM modulation)
Number of channels: Stereo (two channels)
Maximum output power (@1KHz):
18W*2 @12V 4 ohm
10W*2 @12V 8 ohm
15W*2 @16V 8 ohm
20W*2 @20V 8 ohm
30W*2 @24V 8 ohm (requires heat sink)
Product size: 45x10mm
Colour: blue+green
Material: PCB+metal

Package Contents:
1 * Amplifier board

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.