e start by e fit for Toyota H Hyundai KIA FORD MAZDA e start bluetooth APP no need add push start

No need add push on start/stop,easy to install , for e start by e controller

Product function introduction:This system does not need to install push on start . It is easy to install and does not affect the car system. a special two-way cable to connect the male and female connector of the car ignition locker. There is no need to deal with the ignition locker. Ar the car e started ,the device will turn off engine while you step on the foot brake , then the key to start the vehicle and drive normally. If you insert key and turn it to ON before step on the foot brake , then engine will not turn off ,you can drive as in normal driving .1. Main functions:e start by e controller or APP (4G network or Bluetooth, Bluetooth is standard configuration, you need buy additional 4G network module if you want to control the car unlimited distance )2. How to do e start?2.1 Pre the unloon on the e controller more than 5 times in 5 seconds. (Note: Need to connect the unlocking wire, please refer to the installation manual)2.2 APP e start function. (Must buy additional Bluetooth or 4G module )3. How to stop the engine ar e start?3.1 Step on the foot brake3.2 APP to do e stop.(Must buy additional Bluetooth or 4G module )3.3 The device will turn off engine within 15 min if there is no any operation.How to install equment easily ?For a simple installing , it only need connect foot brake ,lock, unlowire and plug two-way special ignite cable , Bluetooth to do e start. The device will lothe car automatically ar e start. To entry the car, key open the door or APP unloif unlowire connected.If need e to do e start , it need connect unloor lopositive detecting wire to e detecting wire of the device, to pre e unloor loon 5 times within 3 seconds .How to look for unlo/ lopositive detecting wire ?For this wire ,There is no+12V under normal conditions, and there is a nsient+12V when pre unloon of e controller, you can find it on the cenl locking motor or other positionsNote :If unlodetecting wire connected, the doors beca by e controller ar e start, recommend connect lowire , the device will loautomatically ar e start. And the r can do unloby key or APP (it need connect unlowire ) to entry the car.If lodetecting wire connected, the doors locked ar e start, then no need connect loand unlowire if you open the door by key Note :4G network module must work with the e start device together , it is only for connecting the e start device to smart phone, so don’t only buy 4G module