ELM327 WIFI BOD C Diagnostic Scanner HonTai

Product details of ELM327 WIFI BOD C KONNWEI Diagnostic Scanner

• Item Type: Code Readers & Scan Tools
• Software Version: ELM327 WIFI BOD C
• Working Temperature: -60--+60 (c)
• Material Type: Plstics and electric parts
• Model name: Automotive Fault Diagnostic
• Item Type: Multimeters & Analyzers
• Special Features: Wifi

ELM327 WIFI BOD C KONNWEI Diagnostic Scanner for Car IPHONE IPAD Android ISO Automotive Fault Diagnosis Instrument car-detector

ELM327 WIFI BOD C KONNWEI Diagnostic Scanner for Car IPHONE IPAD Android ISO Automotive Fault Diagnosis Instrument car-detector

SSID: CLKDevices

Port: 35000

Range: 50 ft (Line of sight)

Antenna: Internal

Power Consumption: 0.75 Watts (With Power Switch)

Wifi Standard: 802.11a/b/g

Operating Temperature: -15 to 100 Deg Celsius

Plastic: Automotive Grade
Physical Dimensions: 2.75 x 1.25 x 1.2 inches

Description

CLKis capable of communicating with vehicles which adopt following protocols:

ISO 9141

ISO 11898(aka. CAN)

ISO 14230(aka. KWP2000)

ISO 15765(aka. CAN)

SAE J1939

CLKis able to detect and interpret these protocols automatically. It also provides support for high speed communications and a low power sleep mode. It use AT commands to communicate with a host device (PC, notebook, iPhone, iPod touch, iPad and so on). There are plenty of software packages available, which are fully compatible withCLK. Some of them have pretty useful features, such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc. You can even write your own software on a specified hardware platform if you wish, because the AT commands are fully documented and very well explained.CLKis measuring only 2.7 x 1.25x 0.9 inches, and it comes attached with a 6 ft OBDII cable for easy installation. It also comes included with a power switch built-in to prevent the need for having to constantly disconnect your unit from the OBDII port.It is compatible with 1996 and later vehicles. Connecting to your iPhone / iPod touch is made by WIFI connection in adHoc mode.

With proper software installed in the host device, you may have following parameters read out from your vehicle:

Vehicle Speed

RPM

Fuel Consumption*

Engine Coolant Temp

Fuel Pressure

Calculated Engine Load

Throttle Position

Intake Manifold Pressure

Air Intake Temp

Timing Advance

Mass Air Flow

Fuel Level

Barometric Pressure

EVAP System Vapor Pressure

Fuel Trim