ESP8266 CP2102 Development Board+USB Cable ESP-12E MCU

1. 802.11b/g
2. Built-in 10bit high-precision
3. Built-in /IP protocol cable
4. Built-in switch, balun, LNA, power amplifier and matching network
5. Built-in PLL, voltage regulator and power management components,+20dBm output power in 802.11b mode

6. Aggregation of A-MPDU and A-MSDU and protection interval of 0.4s
7. WiFi@2.4GHz , support WPAWPA2 security mode
8. Support AT remote upgrade and cloud OTA upgrade
9. Support STAAP/STA+ working mode
10. Support Smart Config function (including Android and ios devices)
11,HSPI,UART,I2C,I2S,IR Remote Control,PWM,GPIO
12. The holding current of deep sleep is 10uA, and the turn-off current is less than 5uA
13. Wake up, connect and data packets within 2ms
14. Power consumption in standby mode is less than 1.0mW (DTIM3)
15. Operating temperature range: - 40 ° C~125 ° C
16. Built-in Tensilica L106 ultra-low power 32-bit -type MCU, main frequency support 80MHz and 160MHz support RTOS
17. Product size: 57 x 30mm
Colour:black
Material:PCB+metal

Package Contents:
1 x ESP8266 CP2102 development board
1 x USB data cable

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the a little different from the real thing. The measurement allowed error is +/- 1-3cm.