F30 Straight nail dedicated 1800W 220-240V 30pcs/min F30 Electric Nailer Gun Electric Stapler Straight Nail Gun Tool for Wood

F30 Straight nail dedicated1800W 220-240V 30pcs/min F30 Electric Nailer Gun Electric Stapler Straight Nail Gun Tool for Wood

Technical Specifications:

Power:1800W

Weight:1.4-1.5kg

Voltage:220-240V~HZ

Max Staple Speed:20 shot/min

Extension power: please use extension cord with the conducting section more than 1.25mm⑵

Features of the product :

1. The patent technology features creation and excellency in performance.

2. Small in size, Light in weight and portable.

3.Low in woriking noise,suit for indoor decoration in residencialarea

Operation Instructions:

A. Nail Aembly

1. Unplug the unit, to avoid any damage caused.

2.Choose suitable nails.

3.Pull the magazine off,aemble the nails correctly,push the nails forward to the nose,then close the magazine,be sune to lock it firmly.

B.Firing Operation

1.Normally,the tool is only used for wooden nailing together.

2.After aembling the nails,the nose of the nailer is flat against the workpiece and kept in right angle.

3.If the workpiece is too hard to fire in, please pre it with more strength and vice versa,so as to keep the nails inside the workpiece properly in depth.

4.Don't fire the nailer without nails,so as to prevent the parts in the tool from damage.

C. Tool Maintainance

1.please clean and maintain.the tool regularly, to keep the magazine and the nose of the nailer clean without any dirty.

2.The coper centre section inside the extension cord should be more than 1.25mm(2),or will decrease the power.

3.Continuously use the tool can cause the motor overheat .Wait until it cools down naturely,then use it again so as not to down the motor.

4.Don't dismentle the tool willfully,to avoid it to be damaged.

5.In case the tool can't be used normally,send it to the repairing centre to have it repaired in time.

Note :This only applies to F30 Straight nail dedicated .

1 x F30 nail gun (Please Note: No nails included)