For 1/16 RC Car WPL B14 B16K B24K C14K C24K Remote Control/ESC/Charger Companion-US Plug American standard four piece set

Package Include
1 x Adapter
1 x ESC
1 x Receiver
1 x Remote Control
1 x User Manual

Description:
This Remote Control / ESC / Charger Companion for 1:16 RC car WPL B14 /B16K / B24K / C14K / C24K version, you can experience the pleasure of installing a truck by yourself.
Compatible with: 1/16 RC Car WPL B14K /B16K / B24K / C14K / C24K Truck

Specitications: (Remote Controller)
1. Type Name: 2.4G dual with anti-control double setting transmitter( not included )
2. Function: launch , fine-tune center point and anti-runaway settings
3. : 2*AA( not included )
4. Size:23 x 16 x 11cm

Specification: (ESC)
1. Input voltage: 4V~8V
2. : 2S(7.4V)
3. Current:
Forward 30A
40A
Backward 20A
Brake 40A
4. UBEC output: 5.7V, 1A. (supply receiver, servo )
5. Size: 25 x 23 x 5 mm
6. JST head with switch.
7. Wiring:
(Red cable:"+" , Black cable:"-")
Motor (Positive and Negative are not specified)
Black red white Cable: Receiver CH2 (usually black on the outside, white by stickers)
8. Adjustment: The ESC is set at the mid-range interval. The new control generally needs to fine-tune the throttle so that the ESC does not light up. It is the neutral position. The throttle trim is TH TRIM.
8. Suitable for WPL B-14 B-14K B-24 B- B-16 B-16K -14 -14K -24 - B-36 B-36K.

What is the brakes
1.bi-directional electric adjustment with the brake, the handle upward, the motor is moving forward, when the car wants to brake, the handle is down to the down position, when the motor is not moving, it is in the brake state. If you want to move forward or backward, handle it back and move forward or backward.
2.two-way electric adjustment without brakes, the handle is upward, the motor is moving forward, the handle is in the middle, and the natural speed stops. When the handle is down, the motor reverses and reverses, and the handle returns to the middle, and the natural speed stops. When the vehicle is moving forward, the handle is stopped or backward, the handle is down and the electric reversal is reversed; if the motor is to stop, when the motor is just reversed, the handle is back and the car stops.

Use method
1. connect the supply. When the motor is connected to the receiver, there will be a DO sound.
2. if the center is located, the motor will immediately send out the DO BE MI. If it is not in the center position, the motor will generate DO.DO.
It prompts the user to stop sending DO DO BE MI immediately until the user mediate to the central location. The study of the center position can work well.
3.LED state, when the remote control is in the center position, the LED is half bright or extinguished. When the forward or backward, the LED is all bright and the LED flicker when there is no signal.










a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a