Free APP Voice Monitor Over-Speed Mini 4G OBD Car Tr

Functions & Features: Support multiple alarm functions such as vibration alarm, power fai alarm, over-speed alarm, etc. Support Geo-fence, users can define virtual electronic fence through the platform/APP, when the device enters and exits the fence, it can be recognized by the platform and send an alarm.
Alarm SMS/phone: call can be sent to the monitoring number when an alarm occurs, and the alarm can be uploaded to the platform at the same time. The terminal adopts industrial-grade high-stability GPRS module, built-in GSM high-sensitivity antenna,
supports TCP/IP data transmission, and supports domain name/IP address connection to the server. Built-in -capacity memory chip, support offline data storage, and supplementary transmission of blind zone data;
when the vehicle is in a place with weak wireless signal or serious interference, the device will temporarily store the vehicle running data in FLASH, when the wireless signal returns to normal after that, these data can be transmitted to that the data is not missed. Built-in mechanical vibration r, with accurate acceleration algorithm, real-time acquisition of vehicle status and other vehicle condition judgments.
High-sensitivity /BDS dual satellite positioning module, anti-jamming ceramic antenna, more stable satellite signal searching, support A fast positioning and tracking, synchronous timing. # Low power consumption and energy saving mode, intelligent sleep and mechanism, can reduce the average power consumption of the entire system.

Working logistic, After installing the device, it will enter into normal working state after the yellow and blue lights are on all the time. Working logic: on, the device does not sleep, it will upload data every 20 seconds. off, the device will sleep after 10minutes static, and then it will only transmit data pack. If vibration is detected during the period of sleep, the device will recalculate 10 minutes and then sleep.
Vibration alarm: After being , vibrate device will trigger a vibration alarm. After the vibration alarm is triggered, it needs to stand static for 5 minutes, and then the alarm can be triggered again.
Power fai alarm: After the device is connected to the power supply, the device will judge hat it is connected to the power supply. When the device is disconnected from the power supply, the device will trigger a power fai alarm and upload to the server.
Over-speed alarm: Set the over-speed threshold, when the acquisition speed of the device reaches the threshold, the device triggers an over-speed alarm, and upload to the server.
Note: This works on 4g Cat1 network, and we match different 4g module chip to support different frequency bands in different countries
Free tracking platform and APP for .
Mobile APP :
Login by ID number (on device)
Default password:
Color: Black
Material: plastic

Package Contents:
1 x (7670E EU Southeast Asia)

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.