Godox Xpro-N i-TTL Flash Trigger Transmitter with Large LCD Screen 2.4G Wireless X System 32 Channels 16 Groups Support TTL Autoflash 1/8000s HSS for Nikon Series Cameras for Godox Series Camera Flashes Outdoor Flashes and Studio Flashes

Godox Xpro-N TTL Wireless Flash Trigger can not only control the flashes with built-in Godox wireless X system (e.g. camera flashes, outdoor flashes and studio flashes), but also can control for Nikon flashes when using in combination with X1R-N receiver. Featuring multi-channel triggering and stable signal transmission, this flash trigger suits for Nikon series hotshoe-mounted cameras.



Features:

Built-in Godox 2.4G wireless X system & versatile using methods. As a wireless Godox flash trigger(for camera flash, outdoor flash and studio flash); As a wireless trigger for Nikon speedlites; As a wireless shutter release trigger; As a flash (without Godox X system) trigger with 2.5mm sync cord jack.

16 groups and 32 channels to wireless control and trigger. Add 01 to 99 wireless ID settings, which can only achieve triggering when the channels and wireless IDs of the master and slave unit are set to the same, avoiding signal interference effectively.

Fully support TTL autoflash, 1/8000s high-speed sync, multi flash, manual flash, flash exposure compensation, TCM transform function, magnification function, one-shoot & multi-shoot setting, group modeling lamp control, group zooming, adjusting all groups' output value simultaneously, etc.

Extra-large LCD panel, 5 group buttons and 4 function buttons offer convenient manipulation. Only weights 80g for great portability. Support Type-C USB firmware upgrade and wireless triggering by 2.5mm sync cord jack.

The flash trigger is compatible for Nikon series camera models: D5, D4, D60, D70S, D90, D100, D200; D300S, D300, D500, D610, D700, D750, D800; D810, D3100, D3200, D3300, D5000, D5100, D5200; D5300, D7000, D7100.



Specifications:

Brand: Godox

Model: Xpro-N

Compatible Cameras: For Nikon series cameras (i-TTL autoflash) Support for the cameras that have PC sync socket.

Power Supply: 2 * AA batteries (not included)

TTL Autoflash: i-TTL

Manual Flash: Yes

Stroboscopic Flash: Yes

High-Speed Sync: Yes

Second-Curtain Sync: Yes

Flash Exposure Compensation: Yes, ±3 stops in 1/3 stop increments

Flash Exposure Lock: Yes

Focus Assist: Yes

Modeling Lamp: Control the modeling lamp by the flash trigger

Beeper: Control the beeper by the flash trigger

Wireless Setting: The receiver end can control the camera shooting through the 2.5mm sync cord jack

ZOOM Setting: Adjust the ZOOM value by the transmitter

TCM Function: Transform the TTL shooting value into the output value in the M mode

Firmware Upgrade: Upgrade through the Type-C USB port

Memory Function: Settings will be stored 2 seconds after last operation and recover after a restart

Transmission Range (approx.): 0-100m

Built-in Wireless: 2.4G

Modulation Mode: MSK

Channel: 32

Wireless ID: 01-99

Group: 16

Display: Large LCD panel, backlighting ON or OFF

Item Size: 9 * 5.8 * 5cm / 3.5 * 2.3 * 2in

Item Weight: 85g / 3oz

Package Size: 12.2 * 12.2 * 6.2cm / 3.5 * 2.4 * 2in

Package Weight: 168g / 5.9oz



Package List:

1 * Godox Xpro-N Flash Trigger

1 * User Manual (English & Chinese)



Note:

Camera, flash and batteries are not included.