Hardened And Non-magnetic Finder Center End Wiggler Mill Anytime

Welcome to my store, we have many kinds of price products, we launch new products every day, please follow my store and pay more attention, for more products, Please click on the seller information to enter our store to buy, we hope give you a pleasant shopping experience. Thank you and have a nice day!

Description:

Hardened non-magnetic eccentricity edge finder without magnetic separation rod - silver & gold -88mm
Used in a milling machine to find the workpiece edge,All working surfaces are hardened and ground,Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line
Titanium coating is wear-resistant and non-magnetic. The spring force is small to avoid breakage of the small milling or the drill bit.
The 10mm diameter can be mounted on the chuck or the drill chuck. Gently press the side of the probe with your finger to make it eccentric 0.5 mm. Rotate it at a speed of 400-600 RPM.
When the probe is brought into contact with the end surface of the workpiece, and the touch is moved little by little, the probe will start to slide in a certain direction. This sliding starting point is the reference position to be sought. The position of the end face of the workpiece itself is the coordinate position of the probe with a radius of 5 mm

Specification:

Material: steel
Product detailed size: small head: 4mm/0.16inch
middle: 17.5mm/0.69inch
shank diameter: 10mm/0.39inch
full length: 88mm/3.46inch

Package Includes:

1 Piece Hard eccentric edge finder

Edge Center Finder;Edge Fnder;Edge and Center Finder;Conventional Edge Finder Set;Micro Edge Finder