Harmonic Damper Pulley Holding Tool Crankshaft Crank Holder

Fitment: Work for Lexus 1990 and later: 3.0 L6, 3.0 V6, 3.3 V6, 4.0 V8, 4.3 V8, 4.7 V8; Toyota 1996 and later: 3.0 V6, 3.3 V6, 4.0 V6, 4.7 V8. also 4 cyl: 1983-1995 22RE, 1995-2004 2RZ & 1995-2004 3RZ.
Feature: 1. surface coated with black powder, anti-rust and durable.
2. Factory specifications require up to 280 pounds of torque to seat the pulley properly, and our tool allows the factory torque to be attained.
3. Hole in the center of holding tool allows access to the removal of crank shaft bolt.
4. Low profile design, no need to remove radiator or other components to access and remove Harmonic Damper Pulley.

Offset breaker bar attachment point allows easy removal and replacement of crank shaft bolt to factory torque specifications.
Help to remove and install the crank bolt on Lexus and Toyota engines: Easy installation:
1. Use with a inch drive impact wrench and a 22 mm impact socket to spin out the crank bolt.
2. Bolt the Pulley Holding Tool to the pulley with the two provided bolts when installing the pulley.
3. Plug a drive breaker bar into the tool and orient the breaker bar up inside the engine compartment, and then torque the crank nut.
colour: black
Material: steel

Package Contents:
1 x Harmonic Damper Pulley Holding Tool
2 x bolts
2 x washers

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the photo a little different from the real thing. The measurement allowed error is +/- 1-3cm.