Integrated Ceiling Decoration ToolS7000 S8000 S9000 Nail Fire Door And Window Installation Nail

S7000/S8000/S9000 Household Nail Fire Door And Window Installation Nail Integrated Ceiling Decoration Tool

Product

product code:GJ00359

Name: Nail

Model: 7000/00/000

Package weight: 3KG

Packing size: 15*12*10

Product material: alloy steel

Application scope: tooling ceiling, water and electricity, bridge home improvement, ventilation, s, etc.

Instructions

1. Take out the nailing head, install the connecting rod according to the required height, and install the dust cover.

2. Take out the used nails, and tilt the nailing muzzle up to 45 angles (it is strictly forbidden to shoot the muzzle against people).

When installing the nail, the nail tip is facing outward, and the nail is installed to the specified depth (referring to the rear end of the nail is completely submerged in the body, except for 42 fire nails). !

3. Pre the muzzle tightly to the fastened nail shooting position, hold the rod vertically, and drive the nail in the vertical direction.

4. After the nailing is completed, the tip of the should be tilted up 45 to remove the nail (it is strictly forbidden to point the to the person)

5. This product is suitable for the commercial concrete of national standard C20-C.

Pebble lo is greater! Use it with caution! Hollow bricks, block bricks, etc. that do not meet the hardne requirements, do not use!

Maintenance

1. Maintenance cycle standard

1. Standard cleaning cycle: After tightening and striking about 100 times, use a tool to remove the execution residue of the muffler sleeve

Clean up work.

2. Standard maintenance cycle: After tightening and striking about 200 times, remove and clean the retainer with tools

Remains of each part and wipe it.

3. After the end of each working day (regardle of whether the maintenance period is reached after use), execute the "

Disaembly and aembly", clean the internal and external parts of the holder.

2. Maintenance in use

1. If the movable sleeve of the nail holder is found to be inflexible or inconvenient to withdraw the shell during use, the parts should be checked

Whether it is damaged. If it is damaged, it needs to be repd in time. Do not install the damaged parts on the nail holder again to prevent operation safety accidents or damage to other parts. When the body is overheated and affects the grip and use, it should be suspended and used after cooling down in time.

Precautions

1. The instructions must be read carefully before use

2. It is strictly forbidden to pre the top tube by hand when the nail holder has nails

3. It is strictly forbidden to aim the binding hole of the holder at yours or others

4. It is strictly forbidden to pre the nail tube with both hands at the same time

5. It is strictly forbidden not to hold the sliding sleeve when one-handed nailing

6. It is strictly forbidden to use the retainer in ps with and explosive materials

7. Non-workers and minors are not allowed to use this product!

8. After the fixator is disabled and maintained, there should be no body nails in the fixator. 9. The user must bring protective equipment: protective , anti-impact, dust-proof and construction s.

10. During the tightening operation of the holder, the dust cover must be used to prevent material splashing on the working surface.

11. The user must wear , safety , and earmuffs

12. When using, try to put the nail shooter perpendicular to the plane of the base body and push the nail shooter hard to achieve the best effect

13. Remember to retreat each time you use it

14. Do not compre the nail tube with the palm of your hand when using it

15. It is not allowed to aim the at yours or others under any circumstances

16. It is recommended to disaemble and clean every 200 rounds used, it is best to use to clean and do maintenance work to extend the service life;

17. When the shooting is not sound, please be careful not to touch any part of the body directly with your hands when returning the . If there is an unexploded residual that fails to exit, you can only pull it out with the help of foreign objects.

18. Do not use nail shooters in and explosive ps

19. Since the temperature of the nail shooter will be relatively high after a period of use, it is easy to cause s. It is recommended to use two nail shooters interchangeably or rep a nail tube when using a large number of integrated products; use one nail shooter After 40~ shots (about 30 shots in summer), you can rep a nail shooter for use, and then rep it when it cools down; the effect of cro-use back and forth is better

Note:

1. If you choose "Seller's shipping method", please note that this shipping fee is only applicable to some countries / regions, so after you pay, please contact us and we will confirm with you.

2. When the parcel arrives at your local customs, please pay the tax and take the parcel away. We do not bear any customs duties or taxes. If the customs fails due to the buyer's reasons and the goods are returned or destroyed, we will not any money.

3. If you choose , , TNT, UPS, , we will help you arrange international expre delivery and deliver directly to your addre (door to door service)! If the goods are delivered by courier, the buyer is only required to pay taxes upon arrival.

4. Before signing, you must check the package to make sure it is in good condition, and then sign it. If the package is damaged, please take a photo, then immediately complain to the shipping company, remember the complaint number, and then contact me, we will definitely help you.

5. Our working hours: 9: 00-18: 30 Beijing time. In the meantime, we will respond to your meage promptly. During the break, we may not be able to reply to your meage, please understand. We will reply you within 24 hours.