Japanese-Style Light Luxury S925 Silver Gold-Plated Retro Gorgeous Hollow Pattern Hollow Carved Wide Stacked Ring

Material: S925 Silver Plating 14K Light Yellow Gold

Thickened Electroplating

Ring Width 8mm Ring Width 2mm

a Lace Vintage Ring

Such a Complicated Retro Hollow Lace Pattern

It Is Made by Experienced Masters with Fine Carving and Grinding.

It's Beautiful to Get Started with Other Rings

 

 

 





 











 









Many People like Silver Ornaments, but They Don't Know How to Maintain Them. They Even Think That Silver Ornaments Are Difficult to Maintain. This Is Not the Case. the Chemical Properties of Silver Are Not as Stable as That of Platinum and Gold. It Often Turns Black Or Yellow Due to Oxidation and Loses Luster Due to Woter in the Air Or Other Chemicals. after Understanding This Characteristic, we Only Need to Spend Some Time in Our Daily Life to Make the Silver Ornaments We Wear Last as New.
1. the Maintenance Method of Silver Ornaments Is to Wear Every Day, Because the Grease of Human Body Will Make Silver Give off a Warm and Natural Luster (of Course, There Are Some Exceptions, and Some People's Sweat Itself Contains Ingredients That Blacken Silver). Put It Away When You Don't Wear It at Ordinary Times, and Put It in a Closed Pocket to Prevent the Silver Surface from Coming into Contact with the Air and Turning Black by Oxidation.
2. Soil Cleaning Method for Daily Cleaning: Squeeze a Little Toothpaste on the Silver Ornaments, Add Some Water, Rub It Properly until the Small White Bubbles Are Formed, and Then Rinse It with Clean Water to Restore the Light.
3. Do Not Wear Other Precious Metal Jewelry at the Same Time When Wearing Silver Jewelry to Avoid Collision Deformation Or Abrasion.
4. Keep the Silver Ornaments Dry, Do Not Wear Swimming, Do Not Approach Hot Springs and Sea Water.
5. Wipe the Surface of Silver Ornaments with a Soft Cloth Every Day to Keep the Luster. It's Just a Special Silver Cloth. Silver Cleaning Cloth Contains Silver Maintenance Ingredients and Cannot Be Washed with Water.
6. If You Find That the Silver Ornaments Show Signs of Yellowing, You Should Use a Small Jewelry Brush to Clean the Fine Seam of the Ornaments, Then Drop the Silver Milk on the Facial Paper and Wipe Away the Black Oxide on the Surface of the Silver Ornaments, then Wipe the Silver Cloth to Restore the Original Silver and Light of the Jewelry.
7. Here Is a Suggestion: If You Can Restore about 80% of the Silver White Condition with Silver Cloth, You Do Not Need to Use Silver Milk and Silver Washing Water, Because These Products Have Certain Corrosivity, after Using These Products, Silver Ornaments Will Turn Yellow More Easily. Silver Ornaments Are Hard to Wipe White after Being Blackened Many Times.
8. When Using Silver Cleaning Cloth, You Must Distinguish Whether There Is Electroplating Or Not;
Silver Jewelry with Electroplating: the Inner Layer Is Pure Silver, and the Surface Is Being Treated with Current; Electroplating Is Generally Divided into Electric Gold and Platinum; the Method of Identifying Electroplating Is That the Surface Is Shiny and Pure Silver, Which Is as Bright as a Mirror, with Good Reflective Effect and Less Oxidation. the Simple Processing Method of Electroplated Silver Jewelry Is as Follows:
1). First Purchase a Pack of Alum from a Nearby Chinese Pharmacy Or Pharmacy Bureau;
2). Then Boil the Silver Ornaments You Wear with Water in the Ratio of Water 10: Alum 1> (the Water Must Boil);
3). Take out the Silver Ornaments and Put Them into Cold Water to Clean Them with a Soft Brush (Such as Toothbrush) Stained with Toothpaste Or Laundry Milk Or Salad;
4). Blow Dry with a Hair Dryer, and Then Wipe with Suede to Be as Bright as New;
Non-Electroplated Silver Jewelry: It Is Easy to Lose Luster Due to Vulcanization, (Sulfur Dioxide and Silver in the Air Produce Chemical Reaction to Form a Layer of Silver Sulfide on the Silver Jewelry, the Reason Is the Same as the Apple Will Gradually Turn Black after Being Cut). the Silver Accessories Simple Methods to Deal with Electroplating Are as Follows:
1). Use Fire to Bake Silver Ornaments and Destroy the Organizational Structure of the Surface. the Baking Time Depends on the Size and Thickness of Silver Ornaments, Commonly Known as Excessive Fire);
2). after Cooling, Boil It in Alum Water. after Boiling, Take out the Silver Ornaments and Put Them into Cold Water to Clean Them with a Soft Brush (Such as Toothbrush) Stained with Toothpaste Or Laundry Milk Or Salad;
3). Blow Dry It with a Hair Dryer, and Then Rub It with Silver Cloth Or Silver Powder to Show the True Color of Sterling Silver; (Note: This Method Is Not Applicable to the following Silver Ornaments: a. Silver Ornaments Are Inlaid with Plastic/B. Vulcanized (Vulcanized: When Buying Silver Ornaments, There Are Black Parts on the Silver Ornaments. If There Are Totem Patterns, There Are Black Engraved Ones)
9. in Addition, There Is a Trick to Make the Silver Ornaments Brighter. Here Is a Reference for You: If You Want to Make the Newly Bought Silver Ornaments Brighter and Avoid Blackening, you Can Apply a Thin Layer of Transparent Nail Polish on the Surface, and Then Apply It Every Ten Days. to Remove Nail Polish, Soak It in Banana Water and Wash It with Water.

Maintenance Methods of 925 Silver Ornaments

the Chemical Properties of Silver Are Relatively Active, So It Will Form Black Silver Sulfide with Sulfur Dioxide in the Air. When the Surface of Silver Ornaments Is Oxidized and Blackened, the following Maintenance Methods Can Be Used, the Beautiful Luster of Silver Can Be Restored.
1. Add Baking Soda Powder to Clear Water and Then Clean and Wipe It.
2. Use Silver Cleaning Cloth and Silver Cleaning Cream (General Jewelry Stores Should Be Available, Especially It Should Be Pointed out That Silver Cleaning Cloth Contains Special Liquid Medicine and Cannot Be Washed with Water) ﹞.
3. Rub the Jewelry with a Soft Cloth with Some Toothpaste, Wash It with Clean Water, and Wipe It Clean with Cotton Cloth. (Tooth Powder Works Well)
4. Soak the Silver Washing Water, Wash It with Clean Water, and Wipe It Clean with Cotton Cloth to Keep It Dry. However, It Is Recommended to Use Less Silver Washing Water as Much as Possible, Because Silver Washing Water Is a Chemical Product and Uses the Corrosiveness of Silver Washing Water Itself to Clean Silver Ornaments, Which Will Cause Harm to Silver Ornaments after Long-term Use.
after That, I Will Remind You That the Silver Ornaments Should Avoid Contact with Sea Water and Hot Springs. If They Are Not Worn, They Can Be Put into Air-Isolated Containers, Such as Velvet Bags Or Jewelry Boxes, Which Can Keep Your Silver Ornaments as New!