LCD 4 in 1 DC Power Energy Meter Monitor DC14.00-600.0V 20A/50A/100A Volt Amp Watt KWH Monitor

Descrtion

1. Full-view color LED display, simultaneously displaying four electrical : DC voltage, current, power and electricity.

2. Automatic saving function of power measurement data: when power is off, the meter will automatically save the current power value, and the meter will automatically read the value after the next power-on, and continue to aculate on the aculated value.

3. Pre and hold the reset on on the front panel of the meter for 5 seconds, and the aculated power value of the meter will be reset to zero.

4. This meter does not need an external working power supply, and the measured voltage is the working voltage of the meter.

Specification

Product name: LCD numerical DC meter

Display: HD LCD color display

Dimensions: 79*43*48mm

Installation size: 76*39mm

Measurement accuracy: 1%±2 words

Function test: DC voltage, current, power, electric energy (electricity)

1. Working voltage: 7-20VDC 14-600VDC

2.Measuring voltage: 7.00-20.00V DC14-600VDC

3. Measuring current: 0-20.00A (built-in shunt in the meter)

0-50.00A (need to be equped with 50/75mV shunt separately)

0-100.0A (Additional 50/75mV shunt is required)

4. Measuring power: 0-400.0W 0-1000.0W 0-2000.0W

0-12000W 0-30000W 0-60000W

5. Measurement accuracy: 1% level

attention

1.The meter should use in the indoor, do not use outside door.

2.When measuring voltage or current exceeds the rating, the meter will be destroy.

3.You should connect the wire follow the wiring diagram indicate, the meter will destroy with wrong wire connecting.

4.DC current shunt must connect fllow the wiring diagram to the negative of the “mesuring/working voltage”, the meter will destroy with wrong wire connecting.

5.The negative of “mesuring/working voltage” should not connect to the terminal of 3, you must first connect to the DC current shunt, then connect to the terminal of 3 (You must follow the wiring diagram)

6.If you only meaure the voltage, the DC current shunt and the payload is not neceary, you can only connect the positive of “meauring/working voltage” to the terminal of 4 and the negative to the terminal of 3.

Package Included

1 × DC

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.