Liitokala Lii-PD4 LCD 3.7V 26650,21700,20700, 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440 1.2V AA AAA SC NiMH - Charger US/EU Plug

Specification:


Productname:

Liitokala Lii-PD4 LCD 3.7V NiMH Charger US/EU Plug



Brand:

LiitoKala



Model:

Lii-PD4



Input:

AC cable 110V-240V 5060Hz/ 12V 1A (Selective)



Output Currnt (Li-ion):

500mA x4/ 1000mA x2/ 2000mA x1



Output Currnt (Ni-MH):

500mA x4/ 1000mA x2



Output Voltage:

1.48V/ 4.2V/ 3.6V/ 4.35V



Standby Current:

≤15mA



Constant Voltage Cut-off Current:

≤100mA



Size:

147mm(L) x 100mm(W) x 37mm(H)



For :

1.2V Ni-MH/ Ni-CD to 3.7V Li-ion/ 3.2V Li-Fe/ 3.8V Li-ion .

For AA AAA SC 18650/ 26650/ 21700/ 18490/ 17670/ 14500/ IMR 10440

Features: 1. Smart LCD screen, show all the charging status, like Charging Volume, charging time, Current, Volt, type, etc. 2. Press the button to change the type,it will start to charge 5 seconds after setting the type (3.2V or 3.8V), 1.2V Ni-MH and 3.7V li-ion can be detected automatically, so it need set for 3.2V and 3.8V batteries.
3. Charging current automactically Control 500mA,1000mA,2000mA( no.4 slot 2A out put,Ni-Mh/Ni-Cd 1A).
4. Multi- input: AC cable 110-240V 50/60Hz (included)/ 12V 1A adapter(selective), four independent charging and micro computer management system.
5. Charge current intelligent auto-set of total three levels:500mA /1000mA/2000mA),2000mA is fixed for slot#4.
6. Identify Li-ion and Ni-MH batteries automatically and adjust manually the charging mode for LiFePO4 and 3.80V li-ion batteries(IMR)
7 Refresh for OV . It will not charge any of1.65 -2.20V (refresh current can be detected )
8. Multi-safety protection function of over-charge and over-discharge, short circuited, polarity and so on. It can smartly identify broken batteries with much more safety.
How to Use:Put the into the charger and press the button within8 seconds to select the type (automatically recognized as 3.7V Li-ion or 1.2V Ni-Mh. Charging starts after 8 seconds.LCD Display:
1. If no is put in, LCD keeps on Show Null, then into sleep mode.
2. When is detected in, LCD lights on AND 3.7V LCD keep flicker to indicate to set the type, if no operation, it begin to charge 5 seconds later automatically under , LCD will display the charging status, Like TYPE, TIME, VOLUME, VOLT, CURRENT, CHARGED VOLUME.
3. Charger screen will automatically into sleep mode, tap the button can show the type for 5 seconds.
4. LCD screen will light on when charging finished, and you could disconnect them.
5.You do not need adjust charging current, charger will control it smartly, li-ion 2A, Ni-Mh/Ni-Cd 1A.
Warning: 1. This charger can charge a cylindrical -ion batteries and nickel-metal hydride batteries, non-rechargeable iron phosphate ; 2. Before use, please carefully refer to the instructions, pay attention to the recommendation of the charging current, do not exceed the recommended charging current; 3. Do not use adapter; 4. Chargers discharge may be hot, be careful not to burn; 5. Stop use, unplug the , removing the ; 6. it can be used in normal room. 7. This product data for reference , please refer professional .












a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a