This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeIndustrial & ScientificTest, Measure & InspectCalibrationDimensional CalibrationLILYTECH ZL-7850R RS485 Super Long Sensor
GH₵ 542.72
GH₵ 1,025.7947%
2 units left
Order above GHC 150 on Jumia Express items & get free delivery | regular delivery from GH₵ 37.99 to Tema
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees GH₵ 54.65
Ready for pickup between 19 June & 24 June when you order within next 8hrs 39mins
Door Delivery
Delivery Fees GH₵ 66.55
Ready for delivery between 19 June & 24 June when you order within next 8hrs 39mins
Postal Shipping
Delivery Fees GH₵ 37.99
Ready for delivery between 08 July & 22 July when you order within next 8hrs 39mins
Return Policy
Free return within 15 days for all eligible items.Details
Warranty
None
Seller Information
Encantador
66%Seller Score
99 Followers
Seller Performance
Order Fulfillment Rate: Poor
Quality Score: Excellent
Customer Rating: Average
Product details
The following is a detailed introduction about our products:
Name:LILYTECH ZL-7850R RS485 Super Long Sensor Cable
With feature: Sensor cable could be extended to 50 meters. 0-99%RH control. Super high accuracy. Modbus RS485. Additional outputs: two timers for outputs.
With function: Heating / Cooling mode option. Humidifying / de-humidifying mode option.
Temperature and humidity output delay protection. Hight / low temperature / humidity alarm.
Sensor failure alarm and outputs protection.
Calibration for temperature and humidity. Output R1: Could be energized when over hot and/or over wet. Could drive an air exhausting fan, or an alarming indicator.
Two timers:
One timer output is R1, could drive an air exhausting fan periodically.
Another timer outputs R4 and R5 could drive such as incubator egg tray.
R4 and R5 could be energized by keys, suitable for control the egg tray to any angle.
Running status saving for power supply
It is suitable for: Incubator control Swallow, swiftlet humidity control Mushroom house control and so on.
Power supply: 100 ~ 240Vac, 50/60Hz
Accuracy: Temperature: 1% / 25℃
Humidity: ±3% (with the sensor ZL-SHr05J), ±2% (with the sensor ZL-SHr05P)
Setting range: Temperature: 0.0 ~ 65.0℃
Humidity: 0 ~ 80%RH (when U9 = 0 for ZL-SHr05J), 0 ~ 99%RH (when U9 = 1 for ZL-SHr05P)
Display range: Temperature: -20. ~ 80.0℃, Humidity: 0 ~ 99%RH
Outputs:
Temperature control: R3 ≤ 5A
Humidity control: R2 ≤ 3A
Multi-function: R1 ≤ 3A
Timer outputs: R4 and R5 ≤ 1A
Working environment: -10 ~ 45℃, no more than 85%RH, without dew
Case dimension: W78 x H34.5 x D71 (mm)
Installation drilling: W71 x H29 (mm)
Protection level: IP65 (Front side only)
Colour: Black
material: plastic
Package Contents:
1 x Temperature Controller
1 x sensor
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
2989. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !
Name:LILYTECH ZL-7850R RS485 Super Long Sensor Cable
With feature: Sensor cable could be extended to 50 meters. 0-99%RH control. Super high accuracy. Modbus RS485. Additional outputs: two timers for outputs.
With function: Heating / Cooling mode option. Humidifying / de-humidifying mode option.
Temperature and humidity output delay protection. Hight / low temperature / humidity alarm.
Sensor failure alarm and outputs protection.
Calibration for temperature and humidity. Output R1: Could be energized when over hot and/or over wet. Could drive an air exhausting fan, or an alarming indicator.
Two timers:
One timer output is R1, could drive an air exhausting fan periodically.
Another timer outputs R4 and R5 could drive such as incubator egg tray.
R4 and R5 could be energized by keys, suitable for control the egg tray to any angle.
Running status saving for power supply
It is suitable for: Incubator control Swallow, swiftlet humidity control Mushroom house control and so on.
Power supply: 100 ~ 240Vac, 50/60Hz
Accuracy: Temperature: 1% / 25℃
Humidity: ±3% (with the sensor ZL-SHr05J), ±2% (with the sensor ZL-SHr05P)
Setting range: Temperature: 0.0 ~ 65.0℃
Humidity: 0 ~ 80%RH (when U9 = 0 for ZL-SHr05J), 0 ~ 99%RH (when U9 = 1 for ZL-SHr05P)
Display range: Temperature: -20. ~ 80.0℃, Humidity: 0 ~ 99%RH
Outputs:
Temperature control: R3 ≤ 5A
Humidity control: R2 ≤ 3A
Multi-function: R1 ≤ 3A
Timer outputs: R4 and R5 ≤ 1A
Working environment: -10 ~ 45℃, no more than 85%RH, without dew
Case dimension: W78 x H34.5 x D71 (mm)
Installation drilling: W71 x H29 (mm)
Protection level: IP65 (Front side only)
Colour: Black
material: plastic
Package Contents:
1 x Temperature Controller
1 x sensor
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
About Us
We provide the good product with the best price,we support Wholesale/Drop Shipping Order
1. For Drop Shipping order, please remark"dropshipping order", we will prioritize it.
2. For Wholesale/Drop Shipping orders, if you have any ideas about the price or package,please contact us in advance,we will give you the best service to satisfy your demands.
About Shipments
1.We will send out the orders ASAP once your payment is completed normally.
2.Please write your complete delivery address with correct phone number and zip code, especially please confirm your full name.
About After-sale Service
We are reliable seller and we have our professional after-sale service for all of our customs. If there is any question about the order,please contact us in advance ,we will always here until you get a happy answer.
About Feedback
1. Please check the package and item when you get carefully to make sure there is no problem.
2. If you have any problem or are not entirely satisfied with your package,please don’t be hesitate to contact us first before leaving negative feedback. We will resolve the problem to satisfy you.
2989. If there is no problem, please leave us five star positive feedback.
Your affirmation is our greatest motivation ! !
Specifications
Key Features
- With feature: Sensor cable could be extended to 50 meters. 0-99%RH control. Super high accuracy. Modbus RS485. Additional outputs: two timers for outputs.
- With function: Heating / Cooling mode option. Humidifying / de-humidifying mode option.
- Temperature and humidity output delay protection. Hight / low temperature / humidity alarm.
- Sensor failure alarm and outputs protection.
- Calibration for temperature and humidity. Output R1: Could be energized when over hot and/or over wet. Could drive an air exhausting fan, or an alarming indicator.
- Two timers:
- One timer output is R1, could drive an air exhausting fan periodically.
- Another timer outputs R4 and R5 could drive such as incubator egg tray.
- R4 and R5 could be energized by keys, suitable for control the egg tray to any angle.
- Running status saving for power supply
- It is suitable for: Incubator control Swallow, swiftlet humidity control Mushroom house control and so on.
- Power supply: 100 ~ 240Vac, 50/60Hz
- Accuracy: Temperature: 1% / 25℃
- Humidity: ±3% (with the sensor ZL-SHr05J), ±2% (with the sensor ZL-SHr05P)
- Setting range: Temperature: 0.0 ~ 65.0℃
- Humidity: 0 ~ 80%RH (when U9 = 0 for ZL-SHr05J), 0 ~ 99%RH (when U9 = 1 for ZL-SHr05P)
- Display range: Temperature: -20. ~ 80.0℃, Humidity: 0 ~ 99%RH
- Outputs:
- Temperature control: R3 ≤ 5A
- Humidity control: R2 ≤ 3A
- Multi-function: R1 ≤ 3A
- Timer outputs: R4 and R5 ≤ 1A
- Working environment: -10 ~ 45℃, no more than 85%RH, without dew
- Case dimension: W78 x H34.5 x D71 (mm)
- Installation drilling: W71 x H29 (mm)
- Protection level: IP65 (Front side only)
- Colour: Black
- material: plastic
- Package Contents:
- 1 x Temperature Controller
- 1 x sensor
- Only the above package content, other products are not included.
- Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
What’s in the box
1 x Temperature Controller
1 x sensor
1 x sensor
Specifications
- SKU: GE779IP0QR5QXNAFAMZ
- Model: Temperature Controller
- Production Country: China
- Size (L x W x H cm): 11x8x7
- Weight (kg): 0.212
- Color: Black
- Main Material: plastic
- Warranty Address: None
Verified Customer Feedback
This product has no ratings yet.
LILYTECH ZL-7850R RS485 Super Long Sensor
GH₵ 542.72
GH₵ 1,025.7947%
Questions about this product?