MAXKGO NELF V1 ESK8 LED Strip WiFi Controller Compatible with VESC/FSESC/Focbox 18 Color Modes ,With 2M WS2813 Strip

MAXKGO ESK8 sport light strip controller is a dedicated controller for electric skateboard LED light strips. ESK8 controller combines 3 states--standby,breking and moving at the total of 18 color modes, suitable for e-skateborad, longboard, electric scooter and ebike etc..
It could controller six types of LED light strips: APA102, WS2801, WS2811, WS2812,WS2813 and WS2815,and can assistance 2048 LED grains at the exact same time.
It's compatible with VESC / FSESC / Focbox to realize different color shifting (jumping), brightness adjustment, and speed adjustment. The skateboard controller can be switched sensitively without interruption. Therefore, ESK8 controller is popular among electric skateboard enthusiasts.

Product specifications:
Type: 5V, With 2M WS2813 Strip
Rated voltage: 4.5V-5.5V
Minimum current value: 0.5A
Operating temperature: -40-85°C
Best humidity: 85%RH
Connection method: WIFI radio
Language: English
RAM: Built-in 3 modes in the standby state; built-in 8 modes in the moving state; built-in 8 modes in the braking state
Support LED strip type: APA102, WS2801, WS2811, WS2812, WS2813, WS2815
Color mode: most color modes of three states support customization except for a few modes with mark .
Indicator Light:
Blinking slowly for 3 seconds: It means that ESK8 is starting;
Flashing once: it means that a mode switch has just been performed;
Fast flashing: ESK8 has been reset to the factory state;
Steady on: ESK8 is running.
ESK8 Sport LED Strip Controller Features:
1. New visual design, more novel and comfortable.
2. The changing color frequency of the light strip reflects different speed of skateboard, making it safer to skate at night.
3. WiFi connection, one could usemobile phone to changestate, color and speed of the light strip. There are three different states: moving state, braking state, and standby state.
Material:Composite material
colour:Red

Package Contents:
1 x NELF S1 strip controller board (PCB) (soldered wire)
1 x PCB power board 9-90V to 5V step-down module (welded wire)
1 x WS2813 LED Strip 2m
2 x JST-2P line (male)
2 x SM2.54-3P line
2 x SM2.54-4P line
1 x HY2.0-4P to 2.0-7P line
1 x HY2.0-4P to 2.0 8P line
1 x XT60 conversion head
1 x English Manual

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.