Motorcycle TPMS Tire Pressure Monitoring System Gauge USB Charger

Description :

Support battery voltage detection and display , and low - voltage alarm function .
With a QC 3 . 0 fast charging USB output , it can charge mobile phones , and power banks .
Real time monitoring , tyre data shows . LCD display , waterproof and dustproof .
Suitable for two - wheeled motorcycles - suitable for various wheeled motor vehicles .
Save fuel , predict air leakage , reduce tire wear , balance tire pressure , and ensure driving safety .

Specification :

Size : 10x4x14cm
Tire pressure setting range : 0 . 1 ~ 6 . 0Bar
Temperature setting range : 60 ~ 100 centigrade
Working temperature : - 20 ~+ 80 centigrade
Storage temperature : - 30 ~+ 85 centigrade
Power voltage : DC 12V
Output voltage : DC 12V , 9V , 5V
Frequency : 433 . 92MHz ± 20 . 00MHz

Receiver :
Working temperature -- 20 ~ 80 centigrade
Storage temperature : - 30 ~ 85 centigrade
Power - on voltage : DC 5V
Frequency : 433 . 92MHz ± 20 . 00MHz

Sensor :
Working temperature : - 20 ~ 80 centigrade
Storage temperature : - 30 ~ 85 centigrade
Pressure range : 0 ~ 6 . 6Bar
Pressure accuracy : +/- 0 . 1Bar
Temperature accuracy : +/- 3
Transmitting power :& lt ; 10dB
Frequency : 433 . 92MHz ± 20 . 00MHz

Bracket installation instructions
1 . Unscrew the 2 screws , put on the motorcycle / electric bike / bicycle and tighten ;
2 . Place the mounting head of the bracket toward the position you need , and confirm that the bracket is firm ;
3 . Install the tire pressure receiver on the bracket , tighten it and then lock it ; use the ball head to rotate the tuning knob to move the joint part to adjust the appropriate angle appropriately
corresponding position .

Package Includes :

1 X Receiver
2 X Sensors
1 X Brackets
1 Set X Accessories