POE Injector 8 Ports PoE Adapter Ethernet Supply for CCTV

This Non standard passive PoE injector is a simple and convenient equipment for PoE or Non PoE devices via an Ethernet cable. This PoE injector is compatible with IEEE802.3af/at network devices.
It does not have auto detection function and directly supply to the network devices by force as soon as you connect them, powered device or poe splitter must conform to standard IEEE 802.3af/at, the same time your powered device must support poe pin 4/5(+), 7/8(-) midspan.
This POE adapter apply for IEEE802.3af/at standard POE powered devices like , and other IP cameras, or being equipped together with IEEE802.3af/802.3at standard poe splitter for non POE devices.
color:White
material: plastic

Key features:
8 LAN ports, 8 LAN and ports
VOIP phones, IP cameras, WiFi access points, and so on
Same voltage to all ports, is shared equally
2.1 x 5.5 mm for DC plug
LED light
Works with any Ethernet switch or router
Uses 48 V adapter to output 48 V supply
Main Specifications:
1) Voltage: DC12V-48V(up to 10A)
2) Led: Indicate the working state
3) pin: 4&5(+), 7&8(-); Data pin: 1236
4) Lan port: 8ports in RJ45(data in), 8port poe RJ45(data& out)
5) Lan environment: 10/100Mbps Base-T, Ethernet cable: TIA/EIA 568 .5 or .5e
6) Data in: PC/Hub/Switch/Router, etc.
7) Working temp: 0~+40°C
8) Working humidity: 20 ~90% RH non-condensing
9) Storage temp & humidity: -20~+85°C, 10~95% RH
10) Tip: voltage should not be over DC48V
Tips:
Please select according your device consumption, in order to stable running, the consumption must be lower than the supply.
POE camera or should use 48V (3-4A) adapter or switching supply to supply to the module, and the POE port output can start the device normally.
This poe injector should be equipped with a supply, this package does not include supply.

Package Contents:
1 x PoE injector

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.