R3 ATmega328 Microcomputer Board - Blue

The  Atmega328p R3 is the best board to get started with electronics and coding. If this is your first experience tinkering with the platform, the Atmega328p R3 is the most robust board you can start playing with. The Atmega328p R3 is the most used and documented board of the whole Atmega328p R3 family of Development boards. 

The Atmega328p R3 microcomputer board is a microcontroller board based on the ATmega328P (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator (CSTCE16M0V53-R0), a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.. You can tinker with your Atmega328p R3 without worrying too much about doing something wrong, worst case scenario you can replace the chip for a few dollars and start over again.

Specification:

• Microcontroller: ATmega328P
• Operating Voltage: 5V
• Digital I/O Pins: 14 (of which 6 provide PWM output)
• PWM Digital I/O Pins: 6
• Flash Memory: 32 KB (ATmega328P) of which 0.5 KB used by bootloader
• SRAM 2 KB (ATmega328P)
• EEPROM 1 KB (ATmega328P)
• Clock Speed 16 MHz
• LED_BUILTIN 13
• Length 68.6 mm
• Width 53.4 mm
• Weight 25 g