Red 5A Adjustable Buck Converter For Battery/LED/Car Power Module Red

Welcome to my store, we have many kinds of price products, we launch new products every day, please follow my store and pay more attention, for more products, Please click on the seller information to enter our store to buy, we hope give you a pleasant shopping experience. Thank you and have a nice day!

Description:

Buck power converter showing power, Voltage and current with USB output connector(charger for digital devices).
With short-circuit and over-temperature protection,output automatically shut off if over temperature.
Two working modes of constant Voltage and constant current; has red LED indicator for mode notification.
It can be used as an buck module with overcurrent protection capability, battery charger, and LED constant current driver.
With crystal shell, safe, practical, convenient and beautiful.

Specification:

Input voltage: 5-36V
Output voltage: 1.25-32V continuously adjustable
Output current: adjustable, up to 5A (recommended for use within 4.5A)
Output power: maximum 75W (recommended to use within 50W, please use lower pressure for large pressure difference)
Working temperature: -40~+85 degrees
Operating frequency: 180KHz
Conversion efficiency: up to 96%
Short circuit protection: Yes
Over-temperature protection: Yes (automatic shutdown output after over-temperature)
input protection: No, (Please input high-current diode in series if necessary)
Installation method: 4 pieces of 3mm wire
Wiring: terminal or welding terminal, V-IN is input, V-OUT is output
Module size (L:W:H): 68.2x38.8x15 mm / 2.68x1.52x0.59 inch
Weight: 73g

Package Includes:

1 package module
1 package shell

Note:

If the module can not be adjusted, the output voltage is always equal to the input voltage.When you encounter this problem, please counterclockwise rotation of the potentiometer 10 laps or more, then you can adjust the output voltage. Because the factory default output voltage is 17V.
Module output terminal string has a current sampling , there will be 0-0.2V voltage drop after connected to the load, it is a normal phenomenon.
If its output is more than 3A/35W, please enhance heat dissipation!
This DC converter is single output, the output voltage of the USB port is the same as the output voltage of the module, if your load is USB device, please make sure the module's output voltage is set at 5V.

Led Step Down Buck Module;Driver Constant Current Voltage;Constant Current Led Driver;Constant Current Power Supply;Led Current Driver