Soldering Iron LCD Digital Display 80W Electric Adjustable Temperature Solder Iron Station Hand Welding Repair Tools Kit

Product Info

Voltage: AC220-240V OR AC100-130V

Power: 80W

Frequency: 50Hz/60Hz

Temperature Range: 180~500℃/356~932℉

Temperature Stability: ±5℃

Heating Type: Wmore Ceramic

Element Soldering Iron Tips: 900M-B1.2

Wire Length: 1.4m / 55.12in

Soldering Iron Size: Approx.242*25*25mm/9.6*0.98*0.98in

Soldering Iron Weight: Approx.96g/3.4oz

Package Size: Approx. 254*55*35mm/10*2.2*1.4n

Package Weight: Approx. 139g / 4.9oz

80W Solder Kit

Package List :

1pcs 80W Soldering Iron

5pcs iron tips ( I , B , K , 3C , 2.4D )

1pcs iron stand

1pcs Solder wire

1pcs iron heater

1pcs iron casing

1pcs Sucker ( Desoldering Pump )

1pcs Sponge

1pcs Tweezers ESD-15

1pcs Rosin

1pcs Solder Wick CP-2015

1pcs Box

Product Point

Temperature Calibration:

1.After 60 seconds of power on, put the soldering ton a thermometer, and a moderate amount of solder on the soldering tip; make the test point and the soldering thave good touch.

2.When thermometer displays a stable temperature (about 2 seconds), write down the temperature.

3.Move soldering iron away from thermometer; pre the (-) and (+) on at the same time to enter temperature Calibration.

4.Input adjustment quantity. Adjustment quantity=set temperature - measured temperature (see example)

5.Pre the (-) and (+) at the same time to exit temperature interface, finished. Example 1, when setting temperature is 350℃ while measured temperature is 342℃, the correction steps are as follows: a.pre the (-) and (+) at the same time to enter temperature correction interface. b.pre the "+" on till the LCD displays 8℃ c.pre the (-) and (+) at the same time to exit

Product Size

Please do not touch the soldering tand tube when the power is turned on.

Operational Attention

Parameter setting:

1.To pre the red and white on both at the same time before it is power on, power on,after the LCD is working,stop to pre the on, you will enter the setting menu.The LCD shows (F) or (C)

2.Pre the white on to choose C(degree centigrade) or F(Fahrenheit).Pre the Red on to choose Element U20(JCD01),U20(JC D02),U30(JCD03),U40(JCD04). 3.Preing the (-) and (+) at the same time to save your setting operation and quit the setting menu(finished) To protect the user from scald, when on the setting menu, it will stop heating.

Fai warning indication The LCD shows (OP): the heating element is open circuit.

Solution:

1.change the element.

2.To confirm that whether the pin of element is oxidized.

The LCD shows(E1):The outlet is poor contact,or thebattery source interfering the soldering iron that it is power down.

Solution:

1.Unplug the soldering iron.

2.Close the interfering source.

3.To use it far away from the interfering source.

Product Detail

All products are made of high quality materials and quality aurance.

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.