STC-1000 STC-3000 STC-3008 STC-3018 LED Digital Temperature Controller Thermostat Thermoregulator Incubator

STC-1000 Features: 100% brand new and high quality modle: STC-1000 Switch the modes between cool and heat; Control temperature by setting the temperature setting value and the difference value; Temperature calibration; Refrigerating controloutput hello kitty elay protection; Alarm when temperature exceeds temperature limit or when sensor error. Technical Parameters: 1.Temperature measuring range: -50 ° C ~ 99 ° C 2.Resolution: 0.1 ° C; 3.Accuracy:+- 1° C (-50 ° C ~ 70 ° C); 4.Sensor error delay: 1 minute 5.Power supply: AC 110-220V 50/60Hz,  DC 12V, DC 24V, DC12-72V( Choose power supply when you place order ) ; 6.Power consumption: = temperature set value + difference value, and the refrigerating relay is connected; If the “Cool” indicator light flashes, it indicates the refrigerating equment is under compreor delay protect status; when the measuring temperature values temperature set value, the Cool indicator light on, and refrigerating relay disconnects. System starts heating when the measuring temperature value = temperature set value, the "Heat" indicator light is off, and the heat relay disconnects.

Error/Alarm descrtion

Alarm when sensor error: Controller activate the sensor error alarm mode when sensor open circuit or short circuit, all therunning status is closed off with the alarms, and the nixie tube displays “EE”,Pre any key can cancel alarm sound, system back to display the normal temperature when the error and the fault is cleared.

Alarm when the measuring temperature exceeds temperature measuring range:Controller activates the error alarm functionwhen the measuring temperature exceeds the temperature measuring range, all the running status is closed off with the alarms, and the nixie tube displays “HH”,Pre any key can cancel alarm sound, system back to display the normal working mode when the temperature restore to normal measuring range.

Safety Regulations

Danger:

1.Strictly distinguish the sensor down-lead, power wire and output relay interface from one another, and prohibit wrong

connections or overloading the relay.

2.Dangers: Prohibit connecting the wire terminals without electricity cut-off.

Warning:

Prohibit using the machine under the environment of over damp, high temp., strong electromagnetism interference or

strong corrosion.

Notice:

1.The power supply should conform to the voltage value indicated in the instruction.

2.To avoid the interference, the sensor down-lead and power wire should be kept a distance.

Package Included: 1 * Temperature Controller 1 * Temperature sensor

STC-3000

Descrtion:

Switch the modes between cool and heat;

Control temperature by setting the temperature setting value and the difference value;

Temperature calibration;

Refrigerating control output delay protection;

Alarm when temperature exceeds temperature limit or when sensor error.

Specification

Front panel size: 75x34.5(mm)

Mounting size: 71x29(mm)

Product size: 75x34.5x85(mm)

Sensor length: 1 meter (include the probe)

Technical Parameters

Temperature measuring range: -50~99 Celsius

Accuracy: 0.1 Celsius

Sensor error delay: 1 minute

Power supply: DC 12V, DC 24V, 110V/220V AC+10%, 50/60Hz

Power consumption: