Super PDR Tools Small White Glue 20W US Plug et a colle Hot Melt Glue Guns Heat Temperature Tool Guns Thermo Gluegun

----------------------------------------------------------------------------EASY DIY LIFE ,TOP PDR BRAND--------------------------------------------------------------------------

Super PDR Tools Small White Glue 20W US Plug et a colle Hot Melt Glue Guns Heat Temperature Tool Guns Thermo Glue

Description

--- Small and practical, very suitable for home use. The glue can be melted by inserting the strfrom the tail of the glue for 3 minutes, and the melt can be extruded by tapping the trigger.

--- This glue uses high-tech ceramic PTC.

--- High-quality heating elements, fast heating and long service life.

--- Unlimited by voltage fluctuations, it can be used normally between 100V-240V.

--- Safe design to prevent overheating, built-in safety fuse.

--- Insulation electrical strength 3750/min, no breakdown.

Precautions:

1. This is a high temperature glue gun, using a strwith a diameter of 6.8 ~ 7.5 mm. 2. The glue nozzle and the melted glue have a higher temperature during work, and the human body must not touch 3. Because the glue is a high temperature PTC heating element, if it is not used for a long time, please cut off the power supply to prevent the rubber strfrom melting backwards to d amaged glue gun. 4. This tool must be placed on its stand when not in use.

Specifications

1. Size : as following photos

2. Color : White

【Instructions】: 1. First insert the glue stick from the rear end of the glue into the body, then plug the glue into the power supply, and pa the electric heating piece inside the body. 2. Heat for three minutes (don't worry, preheat it and use it again, otherwise pre the trigger hard, the glue stick without melting will block 3. Hold the gun) and pull the on to fill the gel stick and melt it. Then the hot melt glue will flow out from the muzzle to start to stick or fill. 【Precautions】: 1. The adhesive surface of the rubber surface ensures no water, no dust and no oil. The hot melt glue of the glue is mainly filled and bonded. 2. 502 super glue characteristics will not corrode and will not burn the bonded material, and it can be used in the proper place to achieve optimal effect. 3. If the glue is used, it is not neceary to pull out the unused glue stick, and keep it energized for the next time. Note: When the glue is not in use, be sure to turn off the power. Do not let the glue not use the power for more than five minutes! Otherwise it will overheat and burn. The glue head should face down to prevent the glue from flowing backwards, causing damage to the glue gun.

Package

1 * Small White Hot Melt Glue (US Plug )

Details

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for remote areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.