product_image_name-Generic-V1.3 MMDVM_HS_Dual_Hat Duplex spot board +  + OLED Support P25 DMR YSF NXDN For Raspberry pi-1product_image_name-Generic-V1.3 MMDVM_HS_Dual_Hat Duplex spot board +  + OLED Support P25 DMR YSF NXDN For Raspberry pi-2product_image_name-Generic-V1.3 MMDVM_HS_Dual_Hat Duplex spot board +  + OLED Support P25 DMR YSF NXDN For Raspberry pi-3product_image_name-Generic-V1.3 MMDVM_HS_Dual_Hat Duplex spot board +  + OLED Support P25 DMR YSF NXDN For Raspberry pi-4product_image_name-Generic-V1.3 MMDVM_HS_Dual_Hat Duplex spot board +  + OLED Support P25 DMR YSF NXDN For Raspberry pi-5product_image_name-Generic-V1.3 MMDVM_HS_Dual_Hat Duplex spot board +  + OLED Support P25 DMR YSF NXDN For Raspberry pi-6

Share this product

Shipped from abroad

V1.3 MMDVM_HS_Dual_Hat Duplex spot board + + OLED Support P25 DMR YSF NXDN For Raspberry pi

GH₵ 980.00
GH₵ 1,689.0042%

In stock

Order above GHC 150 on Jumia Express items & get free delivery | regular delivery from GH₵ 68.60 to Tema

Promotions

Delivery & Returns

Shipped from abroad 

Choose your location

Pickup Station

Delivery Fees GH₵ 78.12
Ready for pickup between 23 May & 28 May when you order within next 15hrs 58mins

Door Delivery

Delivery Fees GH₵ 90.02
Ready for delivery between 23 May & 28 May when you order within next 15hrs 58mins

Postal Shipping

Delivery Fees GH₵ 68.60
Ready for delivery between 11 June & 25 June when you order within next 15hrs 58mins

Return Policy

Free return within 15 days for all eligible items.Details

Seller Information

CharacterL

100%Seller Score

22 Followers

Follow

Seller Performance

Order Fulfillment Rate: Excellent

Quality Score: Excellent

Product details

V1.3 MMDVM_HS_Dual_Hat Duplex Hotspot board + + OLED Support P25 DMR YSF NXDN For Raspberry pi

Descrtion:

- Duplex variant of MMDVM_HS_Hat - This uses the MMDVM_HS . It has two ADF7021 onboard and allows for duplex operation with two time slots on DMR. - An accidentially deleted 3v3 wire has been added back to the layout. BOM, Mouser cart and stencil stay the same as for rev1.1. - The upper part is TX,the lower is RX . - UHF+VHF - SMA, - Modem select: STM32_HS_GPIO - Set TX frequency,RX frequency - TX,RX frequency had better 10M or more apart. - SLOT1,SLOT2 support. Features:

- High performance 32-bit ARM proceor - Fully tested - Supports DMR, P-25,D-Star and System Fusion - Onboard LEDs to show status (Tx,Rx,PTT,Mode) - Up to 10mW RF power - SMA connector, included - Mounts cleanly on all current Raspberry Pi's including the Pi Zero - The firmware is pre-loaded and is easily upgraded via software. - Open source 3D printable case available - UHF 430-450 MHz,433mhz and 900MHz - VHF 144 220 Opera FREQ Note:

1. Hardware version 1.3, software version 1.4.17 2. Without shell 3. Not include the raspberry pi 4. The firmware is pre-loaded.Please do not upgrade the firmware by yourself. Package Included:

MMDVM Hotspot Module +OLED +2 s

image image image image image

image image image image image

About shping
Shping and Packaging All it will be double checked and well packed before sending.It will be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resoe the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties or taxes. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very ant to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.

Specifications

Key Features

  • Origin:Mainland China
  • DIY Supplies:ELECTRICAL

What’s in the box

1X V1.3 MMDVM_HS_Dual_Hat Duplex Hotspot board + + OLED Support P25 DMR YSF NXDN For Raspberry pi

Specifications

  • SKU: GE779IP0FT8NINAFAMZ
  • Model: CHAdianziclyiqi1648
  • Production Country: China
  • Size (L x W x H cm): 10*10*10
  • Weight (kg): 1
  • Main Material: PVC

Verified Customer Feedback

This product has no ratings yet.

V1.3 MMDVM_HS_Dual_Hat Duplex spot board +  + OLED Support P25 DMR YSF NXDN For Raspberry pi

V1.3 MMDVM_HS_Dual_Hat Duplex spot board + + OLED Support P25 DMR YSF NXDN For Raspberry pi

GH₵ 980.00
GH₵ 1,689.0042%
Questions about this product?

Recently Viewed

See All