Waterproof 220V 30x20CM Thermostor Silicone Heated Pad For 3D Printer Heated Bed

Features:
1. The product is mainly composed of alloy heating wire and silicone rubber high temperature insulation cloth, can fast heating and with high thermal efficiency.
2. Easy to use, safe and waterproof, service life up to five years, its temperature range is -62-235℃.
3. High insulation performance, breakdown voltage up to 20-50KV/mm.
4. Heat : the nickel alloy heating wire wrapped in glass fiber, heating can reach 2.1W/cm2, heating more evenly.
5. -sensitive adhesive maximum temperature: 150℃ continuous, 230℃ instant. (On occasion of density is less than 0.9W/㎡)
Specifications:
Size: 30x20cm
Voltage: 220V
Wattage: 750W
Usage: the back is double-sided adhesive, can be directly attached to the heated products, the plastic can withstand up to 200℃
Notes:
1. The use of such electric devices must be noted that the continuous use of the operating temperature should be less than 240℃, instant no more than 300℃.
2. Silicone heating device can work and state, that is, with the auxiliary plate to close the heated surface. Good heat transfer, the work area temperature does not exceed 240℃, the current density of up to 3W/cm2.
3. Under the installation conditions, allow the working temperature is less than 150℃
Package Included:
1 x 30x20cm Heated Pad










a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a