Wifi Water-Leak Detector Smart Flood Leakage Level Alarm

Features
Water-Leak Detection: The sensor detects water leaks at the installation site. If found, the information is immediately pushed to the phone.
Easy installation: The sensor installation is very simple, you can use adhesive tape or screws (included) to set up the installation where you need to install, please note that the installation locations can be connected to a WiFi router
Use WiFi, no hub needed: the sensor communicates data with the server using WiFi. As long as there is a WiFi networks at home and can access the Internet, the installation conditions can be-mets.
Remote monitoring: Alarm information and sensor records are stored on the server. This design allows us to monitoring whether there is water in our home or office from anywhere through our smartphone. It can also share device control information with others.
Low battery consumption: The sensor consumes very little power in standby mode, the batteries can last for a year. And when it detects that the battery is low, it will remind you to replace the battery through an alarm message.
Notice:
Actual color may be slightly different from the image due to different light effect
Please allow 1-3cm deviation due to manual measurement
Description:
Size: 8.2*4.3*2.2cm
Weight: 63g
Power supply: AA battery *2-1.5V (without battery)
Standby current: 10uA
Standby time: 5 years
Use time: 4years (2 times/month)
Wi-Fi: 2.4GHz
Type protocol: IEEE802.11b/g/n
Wireless range: 45m
Working temperature: 0~40℃ (320F~104F)
Operating humidity: 20%~85%
Storage temperature: 0~60℃ (32F~140F)
Storage humidity: 0%~90%

Package List:

1x Water Leakage Detector