Sandisk Extreme Pro SDXC 64GB card UHS-I super high speed U3 V30 Class10 4K compatible

Extreme Pro SDXC Card Capacity 64GB (User Space approx. 57.6GB) Type Super High Speed SDXC UHS-I Card Supported Formats exFAT UHS Speed Class Speed Class 3 (U3) SD Speed Class CLASS 10 Video Speed Class V30, 4K Ultra HD ready. There is no overseas package product and domestic support. JNH shop domestic. Please check the JNH sticker attached to the product package for the period. A JNH special sticker is required when receiving. If there is no JNH seal, it will be out of scope. Please keep it in a safe place.The maximum read speed of this product is 170MB/s, which exceeds the physical speed of 104MB/s of UHS-1 with 's own standard. is required. Please note that the maximum reading speed is 95MB/s when using a non-dedicated card reader. Regarding the free download of "RescuePRO DELUXE" that comes with this product, first download and install "RescuePRO DELUXE" After activation, open the activation website, enter the included Serial Number, and enter the activation code. Please get After obtaining it, enter the activation code and click the "Activate" button.Regarding the use of this product 1) Please use SDXC compatible equipment. 2) After setting up this product on the device to be used, it must be formatted on the same device. 3) SDXC cards should use a file system called exFAT. Usage in FAT16 and FAT32 formats is not covered. Correct knowledge is required to use FAT16 and FAT32 formats. We have received many reports of problems such as data loss, capacity not recognized correctly, etc.4) If there is a suspicion that the capacity is insufficient, we strongly recommend using the SDFormatter provided by the SD Association. SDFormatter will identify the physical capacity of the SD/SDHC/SDXC card and optimize it with the appropriate file system for best performance. Using this function restores the memory card to its original physical capacity.Please measure with a USB3.0 and UHS-I compatible card reader on a PC equipped with a USB3.0 interface when testing the speed. In order to demonstrate the high-speed performance of UHS-I, not only the card but also the host (computer, camera, card reader, etc.) must support UHS-I. Therefore, a device equipped with USB3.0 and a card reader supporting USB3.0/UHS are required to measure the speed of a high-speed SD card. Otherwise, the original speed of the card cannot be fully realized.