Sandisk Micro SD card 1TB Extreme PRO microSDXC A2 SDSQXCZ-1T00 Nintendo Switch Manufacturer operation confirmed micro SD card 4K Ultra HD A2 compatible SD with adapter

SanDisk Extreme Pro SDXC card; Capacity: 1TB (user area approx. 931GB); Type: Ultra-high speed SDXC UHS-I card; Supported formats: exFAT; UHS speed class: Speed class 3 (U3); SD speed class: CLASS 10; Video speed class: V30, 4K Ultra HD compatible. There is no overseas packaged product or domestic support. One year at the store. * If you are using a Sony R series or Sony α series camera, it may not be recognized properly due to compatibility with this product, so please check the compatible model on the Sony manufacturer site or contact Sony support before purchasing. ..;* * The maximum reading speed of 170MB / s of this product exceeds the physical speed of 104MB / s of UHS-1 by SanDisk's original standard, achieving 170MB / s, but Sandisk's dedicated card reader SDDR-C531 Is required. Please note that the maximum reading speed is 95MB / s except for a dedicated card reader.;Regarding the use of this product 1) Please use an SDXC compatible device. 2) After setting up this product on the equipment used, it must be formatted on the same equipment. 3) SDXC card should use a file system called exFAT. Use in FAT16 and FAT32 formats is out of scope. * Correct knowledge is required to use the FAT16 and FAT32 formats. Customers who use the product without accurate information often have problems such as data loss and incorrect capacity recognition.;4) If you suspect that the capacity is insufficient, we strongly recommend using the SD Formatter provided by the SD Association. SDFormatter identifies the physical capacity of the SD / SDHC / SDXC card and is optimized with the appropriate file system for best performance. By using this function, the memory card will be restored to its original physical capacity.;* Measure with a USB3.0 and UHS-I compatible card reader on a PC equipped with a USB3.0 interface during the speed test. In order to demonstrate the high-speed performance of UHS-I, not only the card side but also the host (personal computer, camera, card reader, etc.) must support UHS-I. Therefore, a device equipped with USB3.0 and a card reader compatible with USB3.0 / UHS are required to measure the speed of the high-speed SD card. Otherwise, the original speed of the card cannot be fully achieved.