Winner Transfer Iron-on light inkjet transfer paper 5.0 20 sheets A4

Search WinnerTransfer Discover More Transfer Papers

 IRON

Set iron to High Temperature Setting and TURN OFF steam.

Apply FIRM, EVEN and HEAVY pressure and iron each area of the image for 5 seconds. Circularly press and iron the image for 5 minutes in total.

Ensure that ALL areas of the image is ironed, especially the corners and edges.

NOTES:

Apply AS MUCH HEAVY PRESSURE AS YOU CAN on the transfer as more pressure will help transfer all of the print onto the fabric.

INSUFFICIENT PRESSURE and IRONING TIME would achieve poor transfer result - the transferred image may peel off.

EASY PRESS

The temperature and time may vary based on different kinds of easy press and the printed image size. Suggest you do a test before transfer onto t-shirts.

For 8.5x11’’ size or A4 image, please use the silicon pad comes with your Easy Heat Press, set temperature to 190℃(374℉), time to 60~70 seconds.

Heat press the whole image slowly from one side to the other, to fix the image onto T-shirt.

Apply AS MUCH HEAVY PRESSURE AS YOU CAN to heat press each half of the image for 10 second, ironing the whole image twice in total(40 seconds).

Apply HEAVY pressure to iron each corner for 5 seconds.

 

HEAT PRESS - TRANSFER STEPS

Set Temperature to 190℃ (374°F), Set Time to 10 seconds, Apply HEAVY pressure.

 

Step 1: PRINT

Print your design on the BLANK Side of transfer paper.

Before Printing:

Select MIRROR Printing.

Set Paper Type to Plain Paper or Photo Paper.

Set Printing Quality to Photo or High Quality Photo.

 

Step 2: CUT

Cut out your design with scissors. If you want to cut with die cutting machine, please choose our Inkjet Heat Transfer Paper Light 2.0 (No Mirror Printing) by clicking product link below.

NOTES:

Trim close to the printed parts but leave a bit of a margin - 2mm.

Don't cut so close that your design falls apart or warps while you are ironing.

 

Step 3: PLACE

Place T-shirt on a solid and heat resistant surface. Iron the T-shirt to remove creases.

Place your design facing DOWNWARDS onto appropriate position of T-shirt.

 

Step 4: TRANSFER

Please refer to the specific operations for your ironing tool accordingly in the above figure.

 

Step 5: COOL PEEL

COOL DOWN the transfer to room temperature, then peel away the backing paper.

 

Step 6: DONE

Congratulations! Your DIY image transfer has been done. Enjoy!

 

WASHING  INSTRUTIONS :

1.Don’t wash within 48 hours after transfer.2.Wash the garment before wearing.3.Don’t use bleach or alkaline detergent.4.Turn the garment inside out when washing.5.Don’t soak to wash.6.Full spin cycle, cold water washing.7.No delicate washing.8.No tumble dry.9.Remove garment promptly after washing, colors may bleed if left wet too long.10.Unfold the transferred image, hang to dry naturally.

 

STORAGE INSTRUCTIONS:

1.Keep the image facing outside when fold the garment. 2.Store the garment in a dry and cool place.3.Keep the unused transfer paper sealed and presser.